Brass dealers in UAE

CuZn37 / CW508L / C27200 Brass | Supplier in UAE & GCC

CuZn37 / CW508L / C27200 — unleaded 63/37 alpha brass: excellent cold forming, brazing and polishing; rod R370 / R310 and sheet R300 / R350 from Dubai.

Industries Served

Manufacturing
Electrical
Construction
Automotive

Overview

CuZn37 (CW508L; formerly DIN 2.0321 / Ms63 and BS CZ108; nearest US equivalent UNS C27200 yellow brass) is the standard 63/37 brass, containing 62.0–64.0% copper with the remainder zinc and lead held to 0.1% maximum. It is a predominantly single-phase alpha brass, which gives it excellent cold-forming properties — deep drawing, bending, spinning, cold heading and up to about 90% cold reduction between anneals — together with good strength, attractive colour and excellent suitability for mirror polishing. It is readily soldered and brazed; welding is possible with care because of zinc fuming. Strength depends on the product standard and temper: EN 12163 rod is supplied soft (R310, ≥ 310 MPa) or cold drawn (R370, ≥ 370 MPa tensile and ≥ 240 MPa proof stress), and EN 1652 sheet from soft R300 (300–370 MPa, ≥ 38% elongation) to half-hard R350 (350–440 MPa) and harder tempers. CuZn37 has good resistance to atmospheres, water, steam and many salt solutions, but like other high-zinc brasses it is susceptible to season (stress corrosion) cracking in ammoniacal environments — a stress-relief anneal at 250–350°C reduces this risk — and it is not a dezincification-resistant grade. Machinability is about 35% of free-cutting brass. Typical uses are sanitary and bathroom fittings, radiator tanks, electrical contacts and connectors, lamp parts, musical instruments and decorative metalwork.

Nifty Alloys supplies CuZn37 / CW508L brass from Dubai, UAE, in round bar (EN 12163 R370 cold drawn as standard, R310 soft on request) and plate / sheet (EN 1652 R300 soft and R350 half hard), with ASTM B36 C27200 supply on request. Every supply carries an EN 10204 3.1 Mill Test Certificate as standard; EN 10204 3.2 third-party inspection is available on request. We deliver across the UAE within 24–48 hours, to Saudi Arabia, Kuwait, Qatar, Oman and Bahrain within 3–5 working days, and export to Europe, India and Africa. Send your size list and temper to request a quote — quotations are turned around the same day.

Chemical Composition

63 %
Cu

Copper

62 – 64 %

37 %
Zn

Zinc

Pb

Lead

≤ 0.1 %

Fe

Iron

≤ 0.1 %

Ni

Nickel

≤ 0.3 %

Sn

Tin

≤ 0.1 %

Al

Aluminium

≤ 0.05 %

Others

total

≤ 0.1 %

Typical value Range (min–max) Minimum (≥) Maximum (≤) Hover / tap for notes

Standard

EN 12163

EN

Revision: EN 12163 — current edition

Copper and copper alloys - rod for general purposes. European standard covering CuAl10Ni5Fe4 (CW307G) and other copper alloy rod and bar products.

European standard for C63200 / CuAl10Ni5Fe4 wrought rod and bar. CW307G is the EN numeric code for the wrought form. CC333G is the EN casting designation. Also see EN 12167 (profiles) and EN 12168 (hollow sections).

Available Forms

Plate / Sheet

0.5–20 mm. Thickness; R300 / R350 per EN 1652 thickness limits. [VERIFY — stock range not confirmed]

Round Bar

4–80 mm. Diameter; R370 to 40 mm, R310 to 80 mm (EN 12163). [VERIFY — stock range not confirmed]

Stock & delivery

Stock location
Dubai, UAE
In stock
R370 rod and R300 / R350 sheet [VERIFY — stocked tempers]; R310 rod and ASTM B36 C27200 on request.
Delivery UAE
24–48 hours
Delivery GCC
3–5 working days — Saudi Arabia, Kuwait, Qatar, Oman, Bahrain
Export
Europe, India, Africa on request
Quotation
Same-day quotation
Minimum order
No minimum order quantity for standard sizes; cut pieces available

Key standards

EN 12163

Designations & Equivalents

StandardDesignationNotes
EN NameCuZn37EN 12163 / EN 1652 designation
EN / WerkstoffCW508L(EN Number) EN numerical designation
UNSC27200Yellow brass (Cu 62.0–65.0%) — CuZn37 range lies within
UNSC27400 — nearestRelated 63/37 yellow brass (higher Pb / Fe allowance)
DIN2.0321 / Ms63Former German designations
BSCZ108Former British designation
JISC2720Japanese Industrial Standard
Common Name5150(SS) Swedish standard
Common NameNone(AMS / MIL) No AMS or MIL specification applies to CuZn37
Common Name63/37 brass / yellow brass / Ms63 / CZ108 brass / brass rod / brass sheetBuyer search terms

Compliance & Certification

StandardStatusNotes
EN 10204 3.1SuitableProvided as standard — chemistry, temper and mechanical properties.
EN 10204 3.2ConditionalAvailable on request with independent third-party inspection — specify at order stage.

Specifications

Mechanical Properties

Values per EN 12163. Bar length compares conditions within each row.

PropertyR370 Rod | EN 12163R300 Plate / Sheet | EN 1652R310 Rod | EN 12163R350 Plate / Sheet | EN 1652
Tensile Strength (UTS)370 MPaminR370, 4–40 mmEN 12163 minimum.300–370 MPaR300EN 1652 range.310 MPaminR310, 2–80 mmEN 12163 minimum.350–440 MPaR350EN 1652 range.
Yield Strength (0.2% Proof Stress)240 MPaminR370EN 12163 minimum (2016+ edition).180 MPamaxR300EN 1652 maximum.120 MPatypicalR310Approximate value — for information.170 MPaminR350EN 1652 minimum.
Elongation14 %minA (A11.3 ≥ 12%)EN 12163 minimum.38 %minA50EN 1652 minimum (A ≥ 48% thicker gauges).30 %minA (A11.3 ≥ 25%, A100 ≥ 20%)EN 12163 minimum.19 %minA50EN 1652 minimum.
Hardness105 HBminH105 equivalentFor information.55–95 HVH055EN 1652 equivalent hardness range.–95–125 HVH095EN 1652 equivalent hardness range.

Physical Properties

PropertyR370 Rod | EN 12163R300 Plate / Sheet | EN 1652R310 Rod | EN 12163R350 Plate / Sheet | EN 1652
Densityat 20°C8.44 g/cm³8.44 g/cm³8.44 g/cm³8.44 g/cm³
Modulus of Elasticityat 20°C110 GPa110 GPa110 GPa110 GPa
Thermal Conductivityat 20°C116 W/m·K116 W/m·K116 W/m·K116 W/m·K
Coefficient of Thermal Expansionat 20–300°C20.5 µm/m·°C20.5 µm/m·°C20.5 µm/m·°C20.5 µm/m·°C
Specific Heat Capacityat 20°C377 J/kg·K377 J/kg·K377 J/kg·K377 J/kg·K
Electrical Conductivityat 20°C28 % IACS28 % IACS28 % IACS28 % IACS

Service Conditions

Service Temperature

Min -196 °CMax 200 °C

Notes

Cold-worked tempers soften progressively above about 200°C (recrystallisation typically 450–600°C). Retains toughness at cryogenic temperatures. Melting point about 900–920°C.

Corrosion Performance

General corrosion

Susceptible to season (stress corrosion) cracking in ammonia / ammoniacal atmospheres when under tensile stress — stress relieve at 250–350°C for 2–6 h. Not dezincification resistant — for potable-water fittings in aggressive water, specify a DZR brass. Attacked by oxidising acids and ammonia solutions.

Pitting resistance

Good resistance to rural, urban and marine atmospheres, water, water vapour, many salt solutions and organic liquids.

Additional notes

Not applicable — PREN is not used for copper alloys.

Heat Treatment

HEAT TREATMENT GUIDE — CuZn37 / CW508L / C27200

Not hardenable by heat treatment — strength from cold work (temper R / H designations). Soft annealing (recrystallisation): about 450–600°C, 1–3 h, air cool — restores ductility (R300 / R310). Stress relieving: 250–350°C for 2–6 h — reduces residual stress and the risk of season cracking without significant softening. Cold working: up to about 90% reduction between anneals. Hot working: possible but CuZn37 is primarily a cold-forming alloy.

ENGINEERING NOTES
Weldability
Fair

Excellent for soft soldering and brazing. Gas (oxy-acetylene) welding is good; arc welding is possible with care — zinc fumes (boiling point about 906°C) cause porosity and require ventilation. Resistance and laser welding are feasible. Stress relieve after welding or forming where season cracking is a risk.

Filler metals
  • RBCuZn-A · AWS A5.8 / BrazingNaval brass brazing rod for joining brass and steel
  • BAg series · AWS A5.8 / BrazingSilver brazing alloys for low-temperature joints
  • ERCuSi-A · AWS A5.7 / TIG / MIGSilicon bronze filler — reduces zinc fuming in arc welding
Machinability
Fair

Machinability about 35% of free-cutting brass CuZn39Pb3 — long, stringy chips; use sharp tools, positive rake and chip breakers. For high-volume turned parts, specify CuZn39Pb3 (CW614N). Excellent for polishing and plating.

Applications

  • Sanitary fittings, taps and bathroom hardware
  • Radiator tanks and heat-exchanger components
  • Electrical contacts, connectors, terminals and lamp holders
  • Deep-drawn, spun and pressed parts
  • Cold-headed fasteners, rivets and pins
  • Musical instruments and organ components
  • Architectural and decorative metalwork, signs and nameplates
  • Pneumatic cylinder components
  • Coppersmithing and general fabrication in GCC workshops
  • Switch components and instrument parts

Frequently Asked Questions

Quick answers on our grades, certification, supply and lead times.

Still have questions?

Our team responds fast with specifications, certification and stock availability.

Contact our team

CuZn37 / CW508L is used for sanitary and bathroom fittings, radiator tanks, electrical contacts and connectors, lamp holders, deep-drawn and spun parts, cold-headed fasteners, musical instruments and decorative metalwork. In the UAE and GCC it is common in plumbing, electrical and architectural applications.

Get in touch

Elevateyourprojectswithoursuperiorsteel