All Products
All Products
Explore the full range of specialty metal grades available from Nifty Alloys. Browse every material family on the left, or pick a category to narrow down to the grades that match your specification
Grades
17-4PH
Precipitation-hardening martensitic stainless steel combining high strength and good corrosion resistance — properties fully tailored through aging heat treatment from H900 to H1150.
316 / 316L / 1.4401 / 1.4404
316 / 316L (1.4401 / 1.4404) — molybdenum-bearing austenitic stainless steel with superior corrosion resistance in chloride, marine, and chemical environments. The most widely specified stainless steel in oil & gas and petrochemical applications globally.
7075 / 3.4365 / UNS A97075
7075-T6 / 3.4365 (UNS A97075) - the highest-strength commercially available aluminium alloy. UTS min 503 MPa T6. Outstanding strength-to-weight ratio for aerospace structural components, plastic injection mould tooling, and high-performance engineering applications.
AISI 4130 / 25CrMo4 / EN18
AISI 4130 (25CrMo4, EN18) — chromium-molybdenum alloy steel combining good strength, weldability, and toughness for oil & gas, aerospace, and structural engineering applications.
AISI 4140
Chromium-molybdenum low-alloy steel offering high tensile strength, toughness, and fatigue resistance — one of the most widely used engineering steels globally.
AISI 4145 / 4145H
AISI 4145 / 4145H — the standard CrMo alloy steel for oil & gas drill collars, HWDP, and BHA components per API Spec 7-1. Higher carbon than 4140 (0.43-0.49% vs 0.38-0.43%) for greater hardness and wear resistance in downhole service. Available as round bar, heavy hollow bar, and forgings.
AISI 4330V / 4330 MOD
AISI 4330V / 4330 MOD (AMS 6411) — high-performance NiCrMoV alloy steel. Superior toughness at Class 2 strength levels vs 4145H. The preferred material for demanding deepwater, HPHT, and high-performance BHA components per API Spec 7-1 Class 2 (150 ksi / 1034 MPa min YS).
AISI 4340 / EN24 / 817M40
AISI 4340 (36CrNiMo4, EN24, 817M40) — Ni-Cr-Mo ultra-high-strength alloy steel with exceptional toughness, deep hardenability, and fatigue resistance for oil & gas, aerospace, and heavy engineering.
C17200 / CuBe2 / CW101C
C17200 / CuBe2 (2.1247, CW101C) - the highest-strength commercially available copper alloy. UTS up to 1400 MPa HT condition. Available per AMS 4534, AMS 4533, and MIL-C-21657 for aerospace and defence applications. Note: beryllium-containing alloy - observe all applicable health and safety regulations.
C18150 / CuCrZr / 2.1293
C18150 / CuCrZr (2.1293, CW106C) - premium precipitation-hardening copper chromium zirconium alloy. Greater strength (up to 550 MPa TH04) and better elevated-temperature property retention than C18200, with equivalent conductivity (>80% IACS). The preferred grade for demanding resistance welding and high-stress mould applications.
C18200 / CuCr1 / 2.1291
C18200 / CuCr1 (2.1291, CW105C) - precipitation-hardening chromium copper combining electrical conductivity greater than 80% IACS with moderate strength and hardness. The standard high-conductivity alloy for resistance welding electrodes, induction coils, and precision electrical engineering components.
C63200 / CuAl10Ni5Fe4 / CW307G
C63200 (CuAl10Ni5Fe4, CW307G) — premium nickel aluminium bronze with outstanding seawater corrosion resistance, cavitation resistance, and biofouling resistance. Supplied per ASTM B150, AMS 4880, and MIL-B-24059 for marine, offshore, and naval applications.
Frequently Asked Questions
Quick answers on our grades, certification, supply and lead times.
Our team responds fast with specifications, certification and stock availability.
Contact our teamWe stock a broad range of engineering metals — alloy steel, stainless steel, tool steel, carbon steel, aluminium and copper alloys — in round bar, flat bar, plate, sheet, pipe/tube, forgings and fasteners. Browse by material family on the left or search by grade name or designation.
Ras Al Khor Ind. Area-2, Dubai United Arab Emirtates
+971 565450916
