Copper Alloys dealers in UAE

C10100 / Cu-OFE / CW009A Oxygen-Free Copper | Supplier in UAE & GCC

C10100 / Cu-OFE / CW009A — 99.99% oxygen-free electronic copper: ≥ 101% IACS conductivity, no hydrogen embrittlement; busbars, vacuum and electronic parts.

Industries Served

Electrical
Power Generation
Manufacturing
Aerospace & Defence

Overview

C10100 oxygen-free electronic copper (EN Cu-OFE / CW009A; formerly DIN 2.0040 and BS C110; JIS C1011) is the highest-purity commercial copper, with at least 99.99% copper and no more than 0.0005% (5 ppm) oxygen, produced without deoxidisers by melting and casting refined cathode under a protective atmosphere. That purity gives the highest electrical conductivity of any copper — 101% IACS minimum in the annealed condition — and thermal conductivity of about 391 W/m·K. Because it contains no oxygen it is immune to hydrogen embrittlement, so it can be welded, brazed and annealed in reducing atmospheres without loss of ductility, and its very low volatility suits high-vacuum service. It is not the same as C11000 electrolytic tough pitch copper (Cu-ETP / CW004A, 99.90% copper with 200–400 ppm oxygen), which is cheaper but can embrittle when heated in hydrogen-bearing atmospheres. C10100 is supplied hard drawn (H04) for strength — typically about 330 MPa tensile — or soft annealed (O60) at about 220–250 MPa with 45–55% elongation for bending and forming. Typical uses are busbars and high-current conductors, vacuum and particle-accelerator components, glass-to-metal seals, rectifiers and semiconductor bases, waveguides, sputtering targets and cryogenic parts.

Nifty Alloys supplies C10100 / Cu-OFE copper from Dubai, UAE, in round bar, flat bar, plate and busbar — H04 hard drawn as standard and O60 soft annealed on request — with ASTM F68 electronic-grade certification on request. Every supply carries an EN 10204 3.1 Mill Test Certificate as standard, with chemistry and conductivity results; EN 10204 3.2 third-party inspection is available on request. We deliver across the UAE within 24–48 hours, to Saudi Arabia, Kuwait, Qatar, Oman and Bahrain within 3–5 working days, and export to Europe, India and Africa. Send your size list and temper to request a quote — quotations are turned around the same day.

Chemical Composition

99.99 %
Cu

Copper

≥ 99.99 %

O

Oxygen

≤ 0.0005 %

Ag

Silver

≤ 0.0025 %

As

Arsenic

≤ 0.0005 %

Sb

Antimony

≤ 0.0004 %

Others

individual impurities

Typical value Range (min–max) Minimum (≥) Maximum (≤) Hover / tap for notes

Standard

ASTM B187 / B187M

Other

Revision: ASTM B187 / B187M — current edition

Available Forms

Busbar

3–20 mm. Thickness; widths to about 200 mm. [VERIFY — stock range not confirmed]

Flat Bar

3–50 mm. Thickness; width to order. [VERIFY — stock range not confirmed]

Plate / Block

3–100 mm. Thickness; cut to size. [VERIFY — stock range not confirmed]

Round Bar

6–200 mm. Diameter, H04 / O60. [VERIFY — stock range not confirmed]

Stock & delivery

Stock location
Dubai, UAE
In stock
H04 hard drawn bar [VERIFY — stocked forms]; O60 soft annealed and ASTM F68 certified material on request.
Delivery UAE
24–48 hours
Delivery GCC
3–5 working days — Saudi Arabia, Kuwait, Qatar, Oman, Bahrain
Export
Europe, India, Africa on request
Quotation
Same-day quotation
Minimum order
No minimum order quantity for standard sizes; cut pieces available

Key standards

ASTM B187 / B187M

Designations & Equivalents

StandardDesignationNotes
UNSC10100Oxygen-free electronic copper (OFE) — primary designation
EN NameCu-OFEEN designation
EN / WerkstoffCW009A(EN Number) EN numerical designation
DIN2.0040 / OF-CuFormer German designation
BSC110Former British designation (oxygen-free high conductivity)
JISC1011Japanese Industrial Standard
ASTMF68 / B170 Grade 1Electron-device OFE / wire bar and billet — aliases only
Common NameC11000 / Cu-ETP / CW004A(Different grade) DIFFERENT GRADE — electrolytic tough pitch copper (99.90% Cu, oxygen-bearing); not an equivalent
Common NameC10200 / Cu-OF / CW008A(Different grade) Related oxygen-free copper (99.95% Cu) without OFE certification — not an equivalent
Common NameNone(AMS / MIL) No AMS or MIL specification applies
Common NameOFE copper / OFHC copper / oxygen-free copper / C101 / CDA 101 / high-purity copper barBuyer search terms

Compliance & Certification

StandardStatusNotes
EN 10204 3.1SuitableProvided as standard — chemistry, temper, mechanical properties and conductivity.

Specifications

Mechanical Properties

Values per ASTM B187 / B187M. Bar length compares conditions within each row.

PropertyH04 Hard Drawn | ASTM B187O60 Soft Annealed | ASTM B187
Tensile Strength (UTS)331 MPatypicalH04 barTypical (48 ksi) [VERIFY — B187 minimum by size].200–250 MPaO60 / R200EN R200 range; ASTM typical 220–250 MPa.
Yield Strength (0.5% Ext.)303 MPatypicalH04 barTypical (44 ksi).–
Elongation16 %typical50 mmTypical.45 %min50 mmTypical 45–55%.
Electrical Conductivity97 % IACStypicalH04Typical — cold work reduces conductivity slightly.101 % IACSminAnnealedMinimum.
Yield Strength (0.2% Proof Stress)–100 MPamaxR200EN maximum.

Physical Properties

PropertyH04 Hard Drawn | ASTM B187O60 Soft Annealed | ASTM B187
Densityat 20°C8.94 g/cm³8.94 g/cm³
Modulus of Elasticityat 20°C115 GPa115 GPa
Thermal Conductivityat 20°C391 W/m·K391 W/m·K
Coefficient of Thermal Expansionat 0–300°C17.7 µm/m·°C17.7 µm/m·°C
Specific Heat Capacityat 20°C385 J/kg·K385 J/kg·K
Electrical Conductivityat 20°C101 % IACS101 % IACS

Service Conditions

Service Temperature

Min -269 °CMax 200 °C

Notes

Cold-worked tempers soften above about 200°C (annealing range about 375–650°C). Excellent for cryogenic service down to liquid-helium temperatures. Melting point 1083°C. Oxidises in air at elevated temperature.

Corrosion Performance

General corrosion

Excellent general corrosion resistance; immune to hydrogen embrittlement. Attacked by oxidising acids, ammonia and sulphides. Not intended for high-velocity seawater (use copper-nickel or NAB).

Pitting resistance

Good resistance to atmospheric, fresh-water and many industrial environments.

Additional notes

Not applicable — PREN is not used for copper.

Heat Treatment

HEAT TREATMENT GUIDE — C10100 / Cu-OFE / CW009A

Not hardenable by heat treatment — strength from cold work only. Annealing (O60): about 375–650°C depending on prior cold work and desired grain size; can be annealed in hydrogen-bearing or reducing atmospheres without embrittlement. Stress relieving: about 150–275°C. Hot working: about 750–875°C. Cold working: excellent — very large reductions possible between anneals.

ENGINEERING NOTES
Weldability
Excellent

Excellent for soldering and brazing; good for gas-shielded arc (GTAW / GMAW), electron-beam and laser welding. Being oxygen-free it does not suffer hydrogen embrittlement during welding or brazing in reducing atmospheres. High thermal conductivity requires preheat for heavy sections in arc welding.

Filler metals
  • ERCu · AWS A5.7 / TIG (GTAW) / MIG (GMAW)Deoxidised copper filler for copper-to-copper welds
  • BCuP series · AWS A5.8 / BrazingCopper-phosphorus brazing alloys for copper-to-copper joints
  • BAg series · AWS A5.8 / BrazingSilver brazing alloys — vacuum-grade (BVAg) for vacuum assemblies
Machinability
Poor

Machinability about 20% of free-cutting brass — soft and gummy, forming continuous chips. Use sharp high-rake tools, high speeds and lubricant. For machined electrical parts, tellurium or sulphur copper are free-machining alternatives.

Applications

  • Busbars, high-current conductors and switchgear components
  • Vacuum chambers, particle-accelerator and high-vacuum components
  • Glass-to-metal seals, vacuum-tube and magnetron parts
  • Rectifiers, transistor and semiconductor bases
  • Waveguides and RF / microwave components
  • Sputtering targets and backing plates
  • Cryogenic and superconductor stabiliser components
  • Induction-heating coils and water-cooled electrodes
  • Transformer, generator and motor windings and connectors in GCC power projects
  • Brazed and welded assemblies where hydrogen embrittlement must be avoided

Frequently Asked Questions

Quick answers on our grades, certification, supply and lead times.

Still have questions?

Our team responds fast with specifications, certification and stock availability.

Contact our team

C10100 oxygen-free electronic copper is used for busbars and high-current conductors, vacuum and particle-accelerator components, glass-to-metal seals, rectifiers and semiconductor bases, waveguides, sputtering targets, cryogenic parts and brazed assemblies. In the UAE and GCC it is used in power distribution, switchgear and electronics manufacturing.

Get in touch

Elevateyourprojectswithoursuperiorsteel