Bronze dealers in UAE

C62300 / CuAl10Fe3 / CA103 Aluminium Bronze | Supplier in UAE & GCC

C62300 / CuAl10Fe3 / CA103 — 9% aluminium bronze: high strength, wear and seawater resistance; bushes, bearings, valve and pump parts, marine fasteners.

Industries Served

Marine
Oil & Gas
Heavy Engineering
Aerospace & Defence
Petrochemical

Overview

C62300 aluminium bronze (CuAl10Fe3; BS CA103; formerly DIN 2.0936; nearest EN grade CuAl10Fe3Mn2 / CW306G; AMS 4635) is a wrought 9% aluminium bronze containing 8.5–10.0% aluminium and 2.0–4.0% iron, with copper the remainder and small permitted amounts of nickel, tin, manganese and silicon. Aluminium raises strength — comparable to medium-carbon steel — and forms a tenacious, self-healing alumina film that gives excellent resistance to seawater, brackish water, many acids and oxidation at elevated temperature, while iron refines the grain and adds further strength. It combines high strength with good ductility and toughness, excellent wear and galling resistance against steel, and good fatigue strength, and it hot works readily. Supplied as hot extruded (M30), it typically gives about 515 MPa tensile and 240 MPa yield strength with 35% elongation; drawn and stress-relieved (HR50) bar reaches about 570–630 MPa tensile and 230–310 MPa yield, and BS CA103 bar of 10–75 mm is typically 600–700 MPa with 155–190 HB. It is non-magnetic, with electrical conductivity of about 12% IACS. Typical uses are bushes and bearings, gears and cams, valve bodies and stems, pump rods and shafts, marine hardware and fasteners, and pole-line hardware.

Nifty Alloys supplies C62300 / CA103 aluminium bronze from Dubai, UAE, in round bar and hollow bar — as extruded (M30) as standard and drawn and stress relieved (HR50) on request — with AMS 4635 supply on request. Every supply carries an EN 10204 3.1 Mill Test Certificate as standard; EN 10204 3.2 third-party inspection is available on request. We deliver across the UAE within 24–48 hours, to Saudi Arabia, Kuwait, Qatar, Oman and Bahrain within 3–5 working days, and export to Europe, India and Africa. Send your size list and temper to request a quote — quotations are turned around the same day.

Chemical Composition

87.5 %
Cu

Copper

9.5 %
Al

Aluminium

8.5 – 10 %

3 %
Fe

Iron

2 – 4 %

Ni

Nickel

≤ 1 %

Sn

Tin

≤ 0.6 %

Mn

Manganese

≤ 0.5 %

Si

Silicon

≤ 0.25 %

Typical value Range (min–max) Minimum (≥) Maximum (≤) Hover / tap for notes

Standard

ASTM B150 / B150M

ASTM

Revision: ASTM B150 / B150M — current edition

Standard specification for aluminium bronze rod, bar, and shapes. Covers C61300, C61400, C62300, C63000, C63200, and other wrought aluminium bronze alloys.

Primary North American standard for C63200 wrought bar and rod. Specifies chemical composition, mechanical properties, and temper designations. Most widely referenced for aluminium bronze bar in UAE and GCC oil & gas and marine procurement.

Available Forms

Hollow Bar

25–300 mm. Outside diameter; range of bores to order. [VERIFY — stock range not confirmed]

Round Bar

10–200 mm. Diameter, M30 / HR50. [VERIFY — stock range not confirmed]

Stock & delivery

Stock location
Dubai, UAE
In stock
M30 as-extruded bar and hollow bar [VERIFY — stocked sizes]; HR50 and AMS 4635 on request.
Delivery UAE
24–48 hours
Delivery GCC
3–5 working days — Saudi Arabia, Kuwait, Qatar, Oman, Bahrain
Export
Europe, India, Africa on request
Quotation
Same-day quotation
Minimum order
No minimum order quantity for standard sizes; cut pieces available

Key standards

ASTM B150 / B150M

Designations & Equivalents

StandardDesignationNotes
UNSC62300Primary chemistry (ASTM B150)
Common NameCuAl10Fe3(DIN Name) Former DIN 17665 designation
DIN2.0936Former German material number
EN NameCuAl10Fe3Mn2 / CW306G(EN (nearest)) Nearest EN 12163 grade — higher Mn; not identical
BSCA103BS 2874 wrought designation — NOT CA104
AMSAMS 4635Bars, rods, forgings, stress relieved (Module 2)
Common NameSB-150 / J461 / J463 / CA623(ASME / SAE) ASME and SAE equivalents — aliases only
Common NameDelta CA7 / JIS C6161 / GB QAl9-4(Other) Proprietary-standard and national equivalents — aliases only
Common NameAB1 (BS 1400) / CC331G(Cast reference) Cast counterpart — reference only, not an equivalent of wrought C62300
Common Name9% aluminium bronze / aluminium bronze bar / CA103 bar / ally bronzeBuyer search terms

Compliance & Certification

StandardStatusNotes
EN 10204 3.1SuitableProvided as standard — chemistry, temper and mechanical properties.
EN 10204 3.2ConditionalAvailable on request with independent third-party inspection — specify at order stage.
AMS 4635ConditionalSupplied to AMS 4635 on request — confirm revision and chemistry.

Specifications

Mechanical Properties

Values per ASTM B150 / B150M. Bar length compares conditions within each row.

PropertyM30 As-Extruded | ASTM B150HR50 Drawn & Stress Relieved | ASTM B150
Tensile Strength (UTS)515 MPaminTypical 517 MPaM30Quoted minimum [VERIFY]; typical 75 ksi.570–630 MPaHR50Typical range [VERIFY B150 minimum].
Yield Strength (0.5% Ext.)205 MPaminTypical 241 MPaM30Quoted minimum [VERIFY]; typical 35 ksi.230–310 MPaHR50Typical range.
Elongation20 %minTypical 35 %50 mmQuoted minimum [VERIFY]; typical 35%.18–32 %50 mmTypical range.
Hardness80 HRBtypicalM30Typical.155–190 HBBS CA103 bar 10–75 mmTypical — guidance.

Physical Properties

PropertyM30 As-Extruded | ASTM B150HR50 Drawn & Stress Relieved | ASTM B150
Densityat 20°C7.66 g/cm³7.66 g/cm³
Modulus of Elasticityat 20°C117 GPa117 GPa
Thermal Conductivityat 20°C54 W/m·K54 W/m·K
Coefficient of Thermal Expansionat 20–300°C16.2 µm/m·°C16.2 µm/m·°C
Specific Heat Capacityat 20°C377 J/kg·K377 J/kg·K
Electrical Conductivityat 20°C12 % IACS12 % IACS

Service Conditions

Service Temperature

Min -196 °CMax 400 °C

Notes

Retains good strength to about 300–400°C and resists scaling and oxidation at elevated temperature. Good toughness at sub-zero temperatures. Melting range about 1040–1045°C.

Corrosion Performance

General corrosion

Protective alumina film gives good resistance to many acids (dilute sulphuric, phosphoric, acetic), alkalis and oxidation. Susceptible to de-aluminification in some stagnant / crevice seawater conditions if not correctly heat treated; for the most demanding seawater service nickel aluminium bronze (C63000 / C63200) is preferred.

Pitting resistance

Excellent resistance to seawater, brackish water and marine atmospheres; good resistance to cavitation and erosion.

Additional notes

Not applicable — PREN is not used for copper alloys.

Heat Treatment

HEAT TREATMENT GUIDE — C62300 / CuAl10Fe3 / CA103

Supply: as hot extruded (M30) or drawn and stress relieved (HR50). Annealing: about 593–649°C (1100–1200°F), then cool. Stress relieving: about 300–400°C after machining or drawing. Hot working: about 704–870°C (1300–1600°F) — readily hot worked. Cold working: limited compared with single-phase alloys.

ENGINEERING NOTES
Weldability
Good

Welded by GTAW and GMAW using aluminium-bronze fillers (ERCuAl-A2); the oxide film requires AC (GTAW) or DCEP and thorough cleaning. Brazing is possible with special fluxes because of the alumina film; soft soldering is not recommended.

Filler metals
  • ERCuAl-A2 · AWS A5.7 / TIG (GTAW) / MIG (GMAW)Iron-bearing aluminium-bronze filler — matching strength
  • ECuAl-A2 · AWS A5.6 / SMAWAluminium-bronze covered electrode
Machinability
Fair

Machinability about 50% of free-cutting brass. Use sharp carbide tooling, positive rake, moderate speeds and coolant; produces continuous chips.

Applications

  • Bushes, bearings and wear plates (hollow bar)
  • Gears, worm wheels and drive cams
  • Valve bodies, stems and seats for process and marine service
  • Pump rods, shafts and impeller wear rings
  • Marine hardware and high-strength fasteners for GCC vessels
  • Pole-line hardware and electrical fittings
  • Non-sparking tools and components
  • Aircraft bushes and landing-gear components (AMS 4635)
  • Chemical-process equipment in acidic service
  • Heavy-engineering slides, guides and wear parts

Frequently Asked Questions

Quick answers on our grades, certification, supply and lead times.

Still have questions?

Our team responds fast with specifications, certification and stock availability.

Contact our team

C62300 is used for bushes and bearings, gears and cams, valve bodies and stems, pump rods and shafts, marine hardware and fasteners, pole-line hardware, non-sparking tools and aircraft bushes. In the UAE and GCC it is widely used for marine, oil and gas and heavy-engineering wear parts.

Get in touch

Elevateyourprojectswithoursuperiorsteel