Bronze dealers in UAE

C64200 / CuAl7Si2 / CW302G Silicon Aluminium Bronze | Supplier in UAE & GCC

C64200 / CuAl7Si2 / CW302G — silicon aluminium bronze: best machinability of the Al bronzes, low magnetic permeability; valve stems, fasteners, marine parts.

Industries Served

Marine
Oil & Gas
Aerospace & Defence
Electrical
Manufacturing

Overview

C64200 silicon aluminium bronze (EN CuAl7Si2 / CW302G; AMS 4631; CDA 642; nearest BS CA107) is a ternary copper-aluminium-silicon alloy containing 6.3–7.6% aluminium and 1.5–2.2% silicon, with iron, nickel, tin and zinc held to low limits and copper the remainder. It was originally developed for naval mine-countermeasure vessels, where seawater corrosion resistance had to be combined with very low magnetic permeability, and it is essentially non-magnetic. The silicon addition gives it the highest machinability of the aluminium bronzes — and of any unleaded bronze or brass, with a rating of about 60 — together with self-lubricating, anti-galling and anti-seizing behaviour. Being mainly an alpha structure it hot works easily, can be cold worked to raise strength, and retains good impact strength and ductility down to cryogenic temperatures. Drawn and stress-relieved (HR50) bar to ASTM B150 / AMS 4631 gives 621 MPa minimum tensile and 310 MPa yield up to 12.7 mm, falling to about 517 / 241 MPa at 50–76 mm, with 9–15% elongation. It has corrosion resistance at least equal to copper in seawater and many industrial environments. Typical uses are valve stems, bodies and guides, gears and cams, fasteners and cold-headed nuts, marine hardware and non-magnetic anchor gear, pole-line hardware, helicopter swash-plate bushes and wellhead components.

Nifty Alloys supplies C64200 / CuAl7Si2 silicon aluminium bronze from Dubai, UAE, in round bar, drawn and stress relieved (HR50), with AMS 4631 supply on request. Every supply carries an EN 10204 3.1 Mill Test Certificate as standard; EN 10204 3.2 third-party inspection is available on request. We deliver across the UAE within 24–48 hours, to Saudi Arabia, Kuwait, Qatar, Oman and Bahrain within 3–5 working days, and export to Europe, India and Africa. Send your size list to request a quote — quotations are turned around the same day.

Chemical Composition

91 %
Cu

Copper

7 %
Al

Aluminium

6.3 – 7.6 %

1.8 %
Si

Silicon

1.5 – 2.2 %

Fe

Iron

≤ 0.3 %

Ni

Nickel

≤ 0.25 %

Zn

Zinc

≤ 0.5 %

Sn

Tin

≤ 0.2 %

Mn

Manganese

≤ 0.1 %

As

Arsenic

≤ 0.15 %

Pb

Lead

≤ 0.05 %

Typical value Range (min–max) Minimum (≥) Maximum (≤) Hover / tap for notes

Standard

ASTM B150 / B150M

ASTM

Revision: ASTM B150 / B150M — current edition

Standard specification for aluminium bronze rod, bar, and shapes. Covers C61300, C61400, C62300, C63000, C63200, and other wrought aluminium bronze alloys.

Primary North American standard for C63200 wrought bar and rod. Specifies chemical composition, mechanical properties, and temper designations. Most widely referenced for aluminium bronze bar in UAE and GCC oil & gas and marine procurement.

Available Forms

Round Bar

6–100 mm. Diameter, HR50. [VERIFY — stock range not confirmed]

Stock & delivery

Stock location
Dubai, UAE
In stock
HR50 round bar [VERIFY — stocked sizes]; AMS 4631 certified on request.
Delivery UAE
24–48 hours
Delivery GCC
3–5 working days — Saudi Arabia, Kuwait, Qatar, Oman, Bahrain
Export
Europe, India, Africa on request
Quotation
Same-day quotation
Minimum order
No minimum order quantity for standard sizes; cut pieces available

Key standards

ASTM B150 / B150M

Designations & Equivalents

StandardDesignationNotes
UNSC64200Primary chemistry (ASTM B150 / AMS 4631)
EN NameCuAl7Si2EN 12163 / 12164 designation
EN / WerkstoffCW302G(EN Number) EN numerical designation (confirmed)
BSCA107Nearest only — different Al / Si / Fe limits
AMSAMS 4631Bars and rods (Module 2)
AMSAMS 4634Forgings / shapes — aliases only
Common NameDEF STAN 02-834 / NES 834(UK Defence) Naval specification — aliases only
Common NameQQ-C-465 / J461 / J463 / SB-150 / B124 / B249(Federal / SAE / ASME / ASTM) Legacy federal and related specifications — aliases only
Common NameDelta CA10 / CA12 / CDA 642(Other) Proprietary-standard equivalents — aliases only
Common NameAMS 4631 / 4634 only(AMS / MIL) No MIL specification confirmed
Common NameSilicon aluminium bronze / aluminium silicon bronze / C642 / non-magnetic bronzeBuyer search terms

Compliance & Certification

StandardStatusNotes
EN 10204 3.1SuitableProvided as standard — chemistry, temper and mechanical properties.
EN 10204 3.2ConditionalAvailable on request with independent third-party inspection — specify at order stage.
AMS 4631ConditionalSupplied to AMS 4631 on request — confirm revision.

Specifications

Mechanical Properties

Values per ASTM B150 / B150M. Bar length compares conditions within each row.

PropertyHR50 Drawn & Stress Relieved | ASTM B150
Tensile Strength (UTS)621 MPaminRod ≤ 12.7 mmASTM B150 minimum (90 ksi).
Tensile Strength (UTS)517 MPaminRod 50.8–76.2 mmTypical / AMS band (75 ksi); yield about 241 MPa, El. 15% [VERIFY].
Yield Strength (0.5% Ext.)310 MPaminRod ≤ 12.7 mmASTM B150 minimum (45 ksi).
Elongation9 %min4D, ≤ 12.7 mmASTM B150 minimum.
Hardness80 HRBminHR50Internal hardness minimum (≤ 12.7 mm).

Physical Properties

PropertyHR50 Drawn & Stress Relieved | ASTM B150
Densityat 20°C7.69 g/cm³
Modulus of Elasticityat 20°C110 GPa
Thermal Conductivityat 20°C45 W/m·K
Coefficient of Thermal Expansionat 20–300°C17.3 µm/m·°C
Specific Heat Capacityat 20°C377 J/kg·K
Electrical Conductivityat 20°C8 % IACS

Service Conditions

Service Temperature

Min -196 °CMax 300 °C

Notes

Maintains properties at cryogenic temperatures. Cold-worked HR50 bar softens progressively above about 300°C. Melting range about 982–1004°C.

Corrosion Performance

General corrosion

Good resistance to many industrial and chemical environments; mainly alpha structure gives good resistance to selective phase attack. Attacked by oxidising acids and ammonia.

Pitting resistance

Good resistance in seawater and marine atmospheres — at least equal to copper.

Additional notes

Not applicable — PREN is not used for copper alloys.

Heat Treatment

HEAT TREATMENT GUIDE — C64200 / CuAl7Si2 / CW302G

Not hardenable by heat treatment — strength from cold work (HR50). Annealing: about 700–750°C [VERIFY], then cool. Stress relieving: about 300–350°C after machining. Hot working: readily hot worked (mainly alpha structure). Cold working: good — used to raise strength.

ENGINEERING NOTES
Weldability
Good

Welded by GTAW and GMAW using aluminium-bronze filler (ERCuAl-A2) or silicon-bronze filler for lower-strength joints; clean thoroughly because of the oxide film. Brazing requires special fluxes; soft soldering is not recommended.

Filler metals
  • ERCuAl-A2 · AWS A5.7 / TIG (GTAW) / MIG (GMAW)Aluminium-bronze filler — matching strength
  • ERCuSi-A · AWS A5.7 / TIG / MIGSilicon-bronze filler — lower-strength joints, low magnetic response
Machinability
Good

Machinability rating about 60 — the highest of any unleaded bronze or brass. Silicon gives a self-lubricating, chip-breaking action; use sharp carbide or HSS tooling with positive rake and coolant.

Applications

  • Valve stems, bodies, seats and guides — one of the best valve-stem alloys
  • Gears, cams and worm wheels
  • Fasteners, screw-machine parts and cold-headed nuts
  • Marine hardware, non-magnetic anchors, chains and couplings
  • Non-magnetic instrumentation and mine-countermeasure components
  • Electrical pole-line hardware and cable connectors
  • Helicopter swash-plate and landing-gear bushes (AMS 4631)
  • Wellhead and oil and gas valve components
  • Pump shafts and seawater-service machined parts in the GCC
  • Cryogenic equipment components

Related grades in Bronze

Frequently Asked Questions

Quick answers on our grades, certification, supply and lead times.

Still have questions?

Our team responds fast with specifications, certification and stock availability.

Contact our team

C64200 is used for valve stems, bodies and guides, gears and cams, fasteners and cold-headed nuts, marine hardware and non-magnetic anchor gear, non-magnetic instrumentation, pole-line hardware, helicopter swash-plate bushes and wellhead components. In the UAE and GCC it is valued for machined valve and marine parts.

Get in touch

Elevateyourprojectswithoursuperiorsteel