Bronze dealers in UAE

C86400 / CDA 864 Leaded Manganese Bronze | Supplier in UAE & GCC

C86400 / CDA 864 — cast leaded manganese bronze: free-machining high-strength yellow brass for bushes, gears, valve stems and marine fittings.

Industries Served

Heavy Engineering
Marine
Manufacturing
Construction

Overview

C86400 leaded manganese bronze (CDA 864; nominally CuZn40Fe2AlMnPb; ASTM B505, B584 and B271) is a cast copper-zinc alloy containing 56.0–62.0% copper and 34.0–42.0% zinc, strengthened with 0.4–2.0% iron, 0.5–1.5% aluminium and 0.1–1.0% manganese, with 0.5–1.5% tin and 0.5–1.5% lead. Although sold as a "manganese bronze", it is metallurgically a leaded high-strength yellow brass: an alpha-beta brass in which iron, aluminium and manganese raise strength and corrosion resistance well above ordinary cast yellow brass, while the lead gives free machining — a machinability rating of about 60–65. Sand and centrifugal castings to ASTM B584 / B271 require 414 MPa minimum tensile, 138 MPa yield and 15% elongation; continuous-cast bar to ASTM B505 typically reaches about 448 MPa tensile, 172 MPa yield, 20% elongation and 90 HB. It is the lower-strength, more machinable member of the manganese-bronze family, with good resistance to atmospheric and fresh-water corrosion and good wear resistance under heavy loads at low speeds. Because of its lead content it is not intended for potable-water components. Typical uses are bushes and bearings, gears and worm gears, cams, valve stems, lever arms, marine fittings, steel-mill screwdown nuts, forming rolls and architectural hardware.

Nifty Alloys supplies C86400 leaded manganese bronze from Dubai, UAE, as continuous-cast round bar and hollow bar to ASTM B505, with centrifugal and sand castings to ASTM B271 / B584 on request. Every supply carries an EN 10204 3.1 Mill Test Certificate as standard; EN 10204 3.2 third-party inspection is available on request. We deliver across the UAE within 24–48 hours, to Saudi Arabia, Kuwait, Qatar, Oman and Bahrain within 3–5 working days, and export to Europe, India and Africa. Send your size list to request a quote — quotations are turned around the same day.

Chemical Composition

58 %
Cu

Copper

56 – 62 %

38 %
Zn

Zinc

34 – 42 %

1 %
Fe

Iron

0.4 – 2 %

1 %
Al

Aluminium

0.5 – 1.5 %

0.5 %
Mn

Manganese

0.1 – 1 %

1 %
Sn

Tin

0.5 – 1.5 %

1 %
Pb

Lead

0.5 – 1.5 %

Ni

Nickel

≤ 1 %

Typical value Range (min–max) Minimum (≥) Maximum (≤) Hover / tap for notes

Standard

ASTM B505 / B505M

ASTM

Revision: ASTM B505 / B505M — current edition

Standard specification for copper alloy continuous castings. Covers aluminium bronze casting compositions.

Referenced for cast C63200 and related aluminium bronze casting alloys. Used for cast pump bodies, valve housings, and large-section components. See also ASTM B271 for centrifugal castings and ASTM B148 for sand castings.

Available Forms

Continuous Cast Round Bar

12–230 mm. Diameter, as cast (machined oversize). [VERIFY — stock range not confirmed]

Hollow Bar

25–230 mm. Outside diameter; range of bores. [VERIFY — stock range not confirmed]

Stock & delivery

Stock location
Dubai, UAE
In stock
M07 continuous-cast bar and hollow bar [VERIFY — stocked sizes]; centrifugal / sand castings on request.
Delivery UAE
24–48 hours
Delivery GCC
3–5 working days — Saudi Arabia, Kuwait, Qatar, Oman, Bahrain
Export
Europe, India, Africa on request
Quotation
Same-day quotation
Minimum order
No minimum order quantity for standard sizes; cut pieces available

Key standards

ASTM B505 / B505M

Designations & Equivalents

StandardDesignationNotes
UNSC86400Primary chemistry (ASTM B505 / B584 / B271)
Common Name864(CDA) Copper Development Association number
Common NameCuZn40Fe2AlMnPb(Nominal) Nominal composition designation (not an EN-registered grade)
Common NameHTB1 (BS 1400) / CC765S (EN 1982)(BS / EN (nearest)) Nearest only — these are closer to lead-free C86500
Common NameQQ-C-390 (C2) / QQ-C-523(Federal) Federal casting / ingot specifications — aliases only
Common NameB30 (ingot 420) / B763 / J461 / J463(ASTM / SAE) Ingot, valve-casting and SAE references — aliases only
Common NameASTM Alloy 7A / B147-7A / B132-A(Legacy) Superseded designations — aliases only
Common NameNone(AMS / MIL) No AMS or MIL specification applies
Common NameLeaded manganese bronze / leaded high-strength yellow brass / architectural bronze / 864 bronzeBuyer search terms

Compliance & Certification

StandardStatusNotes
EN 10204 3.1SuitableProvided as standard — chemistry and mechanical properties.

Specifications

Mechanical Properties

Values per ASTM B505 / B505M. Bar length compares conditions within each row.

PropertyM07 As-Continuous-Cast | ASTM B505
Tensile Strength (UTS)448 MPaminM07 continuous castProducer-quoted B505 minimum (65 ksi) [VERIFY]; B584 / B271: 414 MPa.
Yield Strength (0.5% Ext.)138 MPaminTypical 172 MPaM07B584 / B271 minimum 138 MPa; typical 172 MPa.
Elongation15 %minTypical 20 %50 mmB584 / B271 minimum 15%; typical 20%.
Hardness90 HBtypical500 kg loadTypical (105 HB at 3000 kg).

Physical Properties

PropertyM07 As-Continuous-Cast | ASTM B505
Densityat 20°C8.33 g/cm³
Modulus of Elasticityat 20°C97 GPa
Thermal Conductivityat 20°C88 W/m·K
Coefficient of Thermal Expansionat 20–300°C19 µm/m·°C
Specific Heat Capacityat 20°C377 J/kg·K
Electrical Conductivityat 20°C19 % IACS

Service Conditions

Service Temperature

Min -40 °CMax 200 °C

Notes

Suitable for ambient to moderately elevated temperatures (about 200°C) [VERIFY]. Melting range about 862–880°C.

Corrosion Performance

General corrosion

As a high-zinc alpha-beta alloy it can suffer dezincification in stagnant seawater or aggressive waters; for seawater service, aluminium or nickel-aluminium bronzes are preferred. Not for potable water (lead).

Pitting resistance

Good resistance to atmospheric and fresh-water corrosion.

Additional notes

Not applicable — PREN is not used for copper alloys.

Heat Treatment

HEAT TREATMENT GUIDE — C86400 / CDA 864

Supplied as cast (M07 continuous cast; M01 sand / M02 centrifugal on request). Not hardenable by heat treatment. Stress relieving: about 260–350°C after heavy machining [VERIFY]. Hot working: not applicable (casting alloy).

ENGINEERING NOTES
Weldability
Poor

Lead content makes fusion welding difficult (hot-cracking and porosity); not recommended for structural welds. Soldering and brazing are fair. Repairs, where necessary, use aluminium-bronze or manganese-bronze fillers with care.

Filler metals
  • ERCuAl-A2 · AWS A5.7 / TIG / MIGAluminium-bronze filler — repair only
  • RBCuZn-A · AWS A5.27 / BrazingNaval-brass brazing rod — repair / brazing
Machinability
Good

Free-machining — machinability rating about 60–65 (free-cutting brass = 100) thanks to the lead addition. Continuous-cast bar is supplied oversize for finish machining.

Applications

  • Bushes and bearings for heavy loads at low speeds
  • Gears, worm gears and cams
  • Valve stems and valve components (non-potable service)
  • Lever arms, brackets and machinery parts
  • Marine fittings and hardware
  • Steel-mill screwdown nuts and forming rolls
  • Shaft sleeves and wear plates
  • Ordnance and heavy-equipment components
  • Architectural hardware and ornamental castings
  • Machined replacement parts for GCC plant maintenance

Frequently Asked Questions

Quick answers on our grades, certification, supply and lead times.

Still have questions?

Our team responds fast with specifications, certification and stock availability.

Contact our team

C86400 is used for bushes and bearings under heavy loads at low speeds, gears and worm gears, cams, valve stems, lever arms, marine fittings, steel-mill screwdown nuts, forming rolls, shaft sleeves and architectural hardware. In the UAE and GCC it is used for machined replacement parts in plant maintenance.

Get in touch

Elevateyourprojectswithoursuperiorsteel