Bronze dealers in UAE

C90300 / CDA 903 Navy G Tin Bronze | Supplier in UAE & GCC

C90300 / CDA 903 — Navy G 88-8-0-4 cast tin bronze: high wear and corrosion resistance for heavy-load, low-speed bushes, gears and valve parts.

Industries Served

Marine
Heavy Engineering
Construction
Oil & Gas
Aerospace & Defence

Overview

C90300 tin bronze (CDA 903; "Navy G" or modified Navy G; nominally 88-8-0-4, Cu88Sn8Zn4; SAE 620; ASTM B505, B584 and B271) is a cast copper-tin-zinc alloy containing 86.0–89.0% copper, 7.5–9.0% tin and 3.0–5.0% zinc, with lead held to 0.30% maximum and nickel, iron and antimony to low limits. Tin provides solid-solution strength, hardness and excellent corrosion resistance, while zinc acts as a deoxidiser and adds strength; the low lead content makes it essentially a lead-free tin bronze. The alloy combines high tensile, yield and compressive strength with high wear resistance, a low coefficient of friction against steel and excellent resistance to dezincification and corrosion in fresh water, seawater and steam. Continuous-cast bar to ASTM B505 requires 303 MPa minimum tensile, 152 MPa yield and 18% elongation (typically about 70 HB); sand and centrifugal castings to ASTM B584 / B271 require 276 / 124 MPa and 20%. It solders excellently and brazes well, while machinability is moderate (about 30). Typical uses are bushes and bearings for heavy loads at low speeds, bridge and turntable bearings, worm wheels and gears, pump impellers and components, valve parts, steam fittings, piston and seal rings, and marine fittings.

Nifty Alloys supplies C90300 Navy G tin bronze from Dubai, UAE, as continuous-cast round bar and hollow bar to ASTM B505, with centrifugal and sand castings to ASTM B271 / B584 on request. Every supply carries an EN 10204 3.1 Mill Test Certificate as standard; EN 10204 3.2 third-party inspection is available on request. We deliver across the UAE within 24–48 hours, to Saudi Arabia, Kuwait, Qatar, Oman and Bahrain within 3–5 working days, and export to Europe, India and Africa. Send your size list to request a quote — quotations are turned around the same day.

Chemical Composition

88 %
Cu

Copper

86 – 89 %

8 %
Sn

Tin

7.5 – 9 %

4 %
Zn

Zinc

3 – 5 %

Pb

Lead

≤ 0.3 %

Ni

Nickel

≤ 1 %

Fe

Iron

≤ 0.2 %

Sb

Antimony

≤ 0.2 %

P

Phosphorus

≤ 0.05 %

S / Al / Si
Typical value Range (min–max) Minimum (≥) Maximum (≤) Hover / tap for notes

Standard

ASTM B505 / B505M

ASTM

Revision: ASTM B505 / B505M — current edition

Standard specification for copper alloy continuous castings. Covers aluminium bronze casting compositions.

Referenced for cast C63200 and related aluminium bronze casting alloys. Used for cast pump bodies, valve housings, and large-section components. See also ASTM B271 for centrifugal castings and ASTM B148 for sand castings.

Available Forms

Continuous Cast Round Bar

12–250 mm. Diameter, as cast (machined oversize). [VERIFY — stock range not confirmed]

Hollow Bar

25–400 mm. Outside diameter; range of bores. [VERIFY — stock range not confirmed]

Stock & delivery

Stock location
Dubai, UAE
In stock
M07 continuous-cast bar and hollow bar [VERIFY — stocked sizes]; centrifugal / sand castings on request.
Delivery UAE
24–48 hours
Delivery GCC
3–5 working days — Saudi Arabia, Kuwait, Qatar, Oman, Bahrain
Export
Europe, India, Africa on request
Quotation
Same-day quotation
Minimum order
No minimum order quantity for standard sizes; cut pieces available

Key standards

ASTM B505 / B505M

Designations & Equivalents

StandardDesignationNotes
UNSC90300Primary chemistry (ASTM B505 / B584 / B271)
Common Name903(CDA) Copper Development Association number
Common NameNavy G / modified Navy G / 88-8-0-4 / Cu88Sn8Zn4(Common) Traditional names and nominal composition
AISI / SAESAE 620 / J461 / J462(SAE) SAE designation and references
Common NameQQ-C-390 (D5, Types 1–3)(Federal) Federal casting specification — aliases only
Common NameMIL-C-11866 / MIL-C-22229 Comp. 1(MIL) Military references — aliases only [VERIFY scope]
Common NameB30 (ingot 225) / SB-505 / SB-584 / B143-1B(ASTM / ASME) Ingot, ASME and legacy designations — aliases only
JISCAC402 / BC2Nearest Japanese cast bronze
AMSNoneNo AMS specification applies
Common NameTin bronze / Navy G bronze / high-tin bronze / C903 / gunmetal (US usage)Buyer search terms

Compliance & Certification

StandardStatusNotes
EN 10204 3.1SuitableProvided as standard — chemistry and mechanical properties.

Specifications

Mechanical Properties

Values per ASTM B505 / B505M. Bar length compares conditions within each row.

PropertyM07 As-Continuous-Cast | ASTM B505
Tensile Strength (UTS)303 MPaminTypical 310 MPaM07 continuous castASTM B505 minimum (44 ksi).
Yield Strength (0.5% Ext.)152 MPaminTypical 160 MPaM07ASTM B505 minimum (22 ksi).
Elongation18 %minTypical 20 %50 mmASTM B505 minimum.
Hardness70 HBtypical500 kg loadTypical.

Physical Properties

PropertyM07 As-Continuous-Cast | ASTM B505
Densityat 20°C8.8 g/cm³
Modulus of Elasticityat 20°C97 GPa
Thermal Conductivityat 20°C75 W/m·K
Coefficient of Thermal Expansionat 20–300°C18 µm/m·°C
Specific Heat Capacityat 20°C377 J/kg·K
Electrical Conductivityat 20°C12 % IACS

Service Conditions

Service Temperature

Min -196 °CMax 260 °C

Notes

Suitable for steam and hydraulic service to about 260°C (500°F) [VERIFY]; good toughness at low temperature. Melting range 854–1000°C.

Corrosion Performance

General corrosion

Excellent resistance to dezincification (low zinc, high tin); good resistance in marine and industrial environments. Attacked by oxidising acids, ammonia and sulphides.

Pitting resistance

Excellent resistance in fresh water, seawater and steam.

Additional notes

Not applicable — PREN is not used for copper alloys.

Heat Treatment

HEAT TREATMENT GUIDE — C90300 / CDA 903

Supplied as cast (M07 continuous cast; M01 sand / M02 centrifugal on request). Not hardenable by heat treatment. Stress relieving: about 260°C for 1 h per 25 mm of section after heavy machining [VERIFY]. Hot working: not applicable (casting alloy).

ENGINEERING NOTES
Weldability
Fair

Soldering excellent, brazing good; gas-shielded arc and oxy-acetylene welding fair. Preheat heavy sections and use phosphor-bronze filler; avoid restraint to limit hot cracking.

Filler metals
  • ERCuSn-A · AWS A5.7 / TIG (GTAW) / MIG (GMAW)Phosphor-bronze filler — repairs and joining
  • BAg series · AWS A5.8 / BrazingSilver brazing alloys
Machinability
Fair

Machinability rating about 30 (free-cutting brass = 100). Use sharp carbide or HSS tools, positive rake and coolant; continuous-cast bar is supplied oversize for finish machining.

Applications

  • Bushes and bearings for heavy loads at low speeds
  • Movable-bridge, turntable and expansion bearings
  • Worm wheels, gears and pinions
  • Pump impellers, casings and components
  • Valve bodies, seats and components
  • Steam fittings, piston rings and seal rings
  • Marine fittings and hardware for GCC vessels
  • Trunnion, roll-mill and trolley-wheel bearings
  • Aircraft landing-gear and wristpin bushes
  • Plumbing fixtures (subject to project lead-content confirmation)

Frequently Asked Questions

Quick answers on our grades, certification, supply and lead times.

Still have questions?

Our team responds fast with specifications, certification and stock availability.

Contact our team

C90300 is used for bushes and bearings under heavy loads at low speeds, movable-bridge and turntable bearings, worm wheels and gears, pump impellers and components, valve parts, steam fittings, piston and seal rings, and marine fittings. In the UAE and GCC it is used in marine, water-handling and heavy-engineering applications.

Get in touch

Elevateyourprojectswithoursuperiorsteel