Nickel Alloys dealers in UAE

Inconel 625 / Alloy 625 / 2.4856 Nickel Alloy | Supplier in UAE & GCC

Alloy 625 / 2.4856 / UNS N06625 — Ni-Cr-Mo-Nb alloy: 827 MPa Grade 1 bar, PREN > 45, seawater and sour-service resistance, cryogenic to 980°C.

Industries Served

Oil & Gas
Aerospace & Defence
Marine
Petrochemical
Power Generation

Overview

Alloy 625 (UNS N06625, EN 2.4856 / NiCr22Mo9Nb, ASTM B446 / B443 / B564, AMS 5666; widely known by the trade name Inconel 625) is a nickel-chromium-molybdenum alloy containing at least 58% nickel, 20.0–23.0% chromium, 8.0–10.0% molybdenum and 3.15–4.15% niobium plus tantalum. Its strength comes from the solid-solution stiffening effect of molybdenum and niobium on the nickel-chromium matrix, so no precipitation-hardening treatment is needed. The high molybdenum content gives a pitting resistance equivalent above 45, providing outstanding resistance to pitting, crevice corrosion and chloride stress corrosion cracking in seawater and sour production fluids, along with good resistance to a wide range of oxidising and reducing acids and to oxidation at high temperature. It is supplied to ASTM B446 in two conditions: Grade 1 Annealed — 827 MPa minimum tensile and 414 MPa minimum yield for bar up to 102 mm — normally used up to 593°C, and Grade 2 Solution Annealed (690 / 276 MPa) for service above 593°C where creep and rupture resistance matter. Service ranges from cryogenic temperatures to about 980°C, and the alloy has excellent weldability. Typical uses are subsea and wellhead components, sour-gas piping, seawater systems, aerospace ducting and exhausts, chemical-process equipment and flare stacks.

Nifty Alloys supplies Alloy 625 / 2.4856 from Dubai, UAE, in round bar, plate, sheet and forgings, Grade 1 Annealed as standard and Grade 2 Solution Annealed on request, with NACE MR0175, API 6A CRA and AMS 5666 supply on request. Every supply carries an EN 10204 3.1 Mill Test Certificate as standard; EN 10204 3.2 third-party inspection is available on request. We deliver across the UAE within 24–48 hours, to Saudi Arabia, Kuwait, Qatar, Oman and Bahrain within 3–5 working days, and export to Europe, India and Africa. Send your size list, grade and specification to request a quote — quotations are turned around the same day. Inconel® is a registered trademark of its owner.

Chemical Composition

61 %
Ni

Nickel

≥ 58 %

21.5 %
Cr

Chromium

20 – 23 %

9 %
Mo

Molybdenum

8 – 10 %

3.6 %
Nb + Ta

Niobium + Tantalum

3.15 – 4.15 %

3 %
Fe

Iron

≤ 5 %

0.03 %
C

Carbon

≤ 0.1 %

Mn

Manganese

≤ 0.5 %

Si

Silicon

≤ 0.5 %

Al

Aluminium

≤ 0.4 %

Ti

Titanium

≤ 0.4 %

Co

Cobalt

≤ 1 %

P / S

Phosphorus / Sulfur

≤ 0.015 %

Typical value Range (min–max) Minimum (≥) Maximum (≤) Hover / tap for notes

Standard

ASTM B446

Other

Revision: ASTM B446 — current edition

Available Forms

Forging

100–800 mm. Forged discs, rings and blocks to order. [VERIFY — supply range not confirmed]

Plate / Block

3–50 mm. Thickness; cut to size. [VERIFY — stock range not confirmed]

Round Bar

12–254 mm. Diameter, Grade 1 Annealed (B446 properties to 254 mm). [VERIFY — stock range not confirmed]

Sheet

0.5–3 mm. Thickness. [VERIFY — stock range not confirmed]

Stock & delivery

Stock location
Dubai, UAE
In stock
Grade 1 Annealed bar [VERIFY — stocked forms]; Grade 2 Solution Annealed, NACE, API 6A CRA and AMS 5666 material on request.
Delivery UAE
24–48 hours
Delivery GCC
3–5 working days — Saudi Arabia, Kuwait, Qatar, Oman, Bahrain
Export
Europe, India, Africa on request
Quotation
Same-day quotation
Minimum order
No minimum order quantity for standard sizes; cut pieces available

Key standards

ASTM B446

Designations & Equivalents

StandardDesignationNotes
UNSN06625Unified Numbering System — primary chemistry
EN / Werkstoff2.4856European material number
EN NameNiCr22Mo9NbEuropean alloy designation
ASMESB-446 / SB-443 / SB-564ASME equivalents of ASTM product standards — aliases only
AMSAMS 5666Bar, forgings, rings — annealed (Module 2)
AMSAMS 5599Sheet, strip and plate — aliases only
ISONW6625ISO 9722 nickel alloy designation
Common NameAlloy 625 / Nickel 625 / 625 Grade 1 / 625 Grade 2Buyer search terms (trademark used only in SEO / description / FAQ fields)

Compliance & Certification

StandardStatusNotes
EN 10204 3.1SuitableProvided as standard — chemistry, grade / condition, mechanical properties.
EN 10204 3.2ConditionalAvailable on request with independent third-party inspection — specify at order stage.
NACE MR0175 / ISO 15156SuitableAnnealed / solution-annealed Alloy 625 acceptable under ISO 15156-3 within the applicable environmental limits, hardness 35 HRC max [VERIFY — current edition].
API 6A CRAConditionalSupplied certified to API 6A CRA on request [VERIFY — scope for 625].
AMS 5666ConditionalSupplied to AMS 5666 on request — confirm revision.
ASME Section II / VIIISuitableSB-443 / SB-446 / SB-564 material for pressure equipment.

Specifications

Mechanical Properties

Values per ASTM B446. Bar length compares conditions within each row.

PropertyGrade 1 Annealed | ASTM B446Grade 2 Solution Annealed | ASTM B446
Tensile Strength (UTS)827 MPaminBar ≤ 102 mmASTM B446 minimum (120 ksi).690 MPaminAll sizesASTM B446 minimum (100 ksi).
Tensile Strength (UTS)758 MPaminBar 102–254 mmASTM B446 minimum (110 ksi); YS 345 MPa, El. 25%.–
Yield Strength (0.2% Proof Stress)414 MPaminBar ≤ 102 mmASTM B446 minimum (60 ksi).276 MPaminAll sizesASTM B446 minimum (40 ksi).
Elongation30 %minBar ≤ 102 mm, 50 mm / 4DASTM B446 minimum.30 %min50 mm / 4DASTM B446 minimum.
Hardness35 HRCmaxNACE MR0175 / ISO 15156-3Sour-service maximum [VERIFY].–

Physical Properties

PropertyGrade 1 Annealed | ASTM B446Grade 2 Solution Annealed | ASTM B446
Densityat 20°C8.44 g/cm³8.44 g/cm³
Modulus of Elasticityat 20°C207 GPa207 GPa
Thermal Conductivityat 20°C9.8 W/m·K9.8 W/m·K
Coefficient of Thermal Expansionat 20–100°C12.8 µm/m·°C12.8 µm/m·°C
Specific Heat Capacityat 20°C410 J/kg·K410 J/kg·K
Electrical Resistivityat 20°C1.29 µΩ·m1.29 µΩ·m

Service Conditions

Service Temperature

Min -196 °CMax 980 °C

Notes

Service from cryogenic temperatures to about 980°C (oxidation resistance). ASTM B446: Grade 1 normally used to 593°C (1100°F); Grade 2 above 593°C where creep / rupture resistance is required. ASME allows annealed material to about 650°C and solution-treated material higher. Long exposure at about 650–870°C reduces room-temperature ductility.

Corrosion Performance

PREN 51

General corrosion

Excellent resistance to chloride SCC, sour (H2S / CO2) environments, oxidising and reducing acids (nitric, phosphoric, sulphuric, dilute hydrochloric) and alkalis; resistant to intergranular corrosion after welding. Good oxidation and carburisation resistance at high temperature.

Pitting resistance

Essentially immune to pitting and crevice corrosion in natural seawater at ambient temperatures; outstanding resistance in chlorinated and high-temperature brines.

PREN notes

PREN = Cr + 3.3Mo + 16N ≈ 46–56 (typically about 51) — above super duplex and 6Mo stainless.

Heat Treatment

HEAT TREATMENT GUIDE — Alloy 625 / 2.4856 / UNS N06625

Not hardenable by heat treatment — strength from solid solution (Mo + Nb). Grade 1 Annealed: 871°C minimum (typically 925–1040°C), cooling rate not critical — highest strength; for service up to 593°C. Grade 2 Solution Annealed: 1093°C minimum (about 1090–1200°C), rapid cooling; optional stabilising anneal at about 982°C for sensitisation resistance — for service above 593°C. Stress relief: about 590–760°C, or up to 870°C for complete relief. Hot working: about 980–1175°C. Welding: no preheat or PWHT required.

ENGINEERING NOTES
Weldability
Excellent

Readily welded by GTAW, GMAW, SMAW and SAW without preheat or PWHT, using matching ERNiCrMo-3 / ENiCrMo-3 fillers. Clean joints thoroughly to remove sulphur, phosphorus and lead contamination; keep heat input moderate and interpass temperature below about 150°C. Widely used as a weld-overlay and dissimilar-metal filler.

Filler metals
  • ERNiCrMo-3 · AWS A5.14 / TIG (GTAW) / MIG (GMAW)Matching 625 filler wire
  • ENiCrMo-3 · AWS A5.11 / SMAWMatching covered electrode
  • ENiCrMo3T1-4 · AWS A5.34 / FCAWFlux-cored wire for overlay and positional welding
Machinability
Poor

Difficult to machine — high strength and rapid work hardening. Use heavy, rigid machines, sharp positive-rake carbide tools, slow speeds and deep uninterrupted cuts below the work-hardened layer, with generous coolant.

Applications

  • Subsea and wellhead components, hangers and valve parts for GCC oil and gas
  • Sour-gas gathering piping and process equipment (NACE MR0175)
  • Seawater systems, heat exchangers and marine hardware
  • Aerospace ducting, exhaust systems and thrust-reverser parts (AMS 5666)
  • Chemical-process equipment — acids, chlorides and mixed media
  • Flare stacks and high-temperature gas-handling components
  • Bellows, expansion joints and springs
  • Pollution-control and flue-gas desulphurisation equipment
  • Power-generation and nuclear-reactor components
  • Weld overlay and cladding of carbon-steel components

Frequently Asked Questions

Quick answers on our grades, certification, supply and lead times.

Still have questions?

Our team responds fast with specifications, certification and stock availability.

Contact our team

Alloy 625 is used where high strength and outstanding corrosion resistance are needed together: subsea and wellhead components, sour-gas piping, seawater systems and heat exchangers, aerospace ducting and exhausts, chemical-process equipment, flare stacks, bellows and weld overlay. In the UAE and GCC it is a core alloy for oil and gas, sour-service and offshore projects.

Get in touch

Elevateyourprojectswithoursuperiorsteel