Nickel Alloys dealers in UAE

Hastelloy X / Alloy X / 2.4665 Nickel Alloy | Supplier in UAE & GCC

Alloy X / 2.4665 / UNS N06002 — Ni-Cr-Fe-Mo superalloy: high-temperature strength and oxidation resistance to about 1100°C; gas-turbine combustors, furnaces.

Industries Served

Aerospace & Defence
Power Generation
Petrochemical
Heavy Engineering

Overview

Alloy X (UNS N06002, EN 2.4665 / NiCr22Fe18Mo, ASTM B572 / B435, AMS 5754 / AMS 5536; widely known by the trade name Hastelloy X) is a solid-solution-strengthened nickel-chromium-iron-molybdenum superalloy containing 20.5–23.0% chromium, 17.0–20.0% iron, 8.0–10.0% molybdenum, 0.5–2.5% cobalt and 0.2–1.0% tungsten, with 0.05–0.15% carbon. Molybdenum stiffens the matrix to give high strength at elevated temperature, while chromium forms a protective, adherent oxide scale, so the alloy combines excellent oxidation resistance — commonly quoted to 1100–1200°C — with good resistance to reducing, carburising and nitriding atmospheres. It retains good ductility after prolonged high-temperature exposure, resists chloride stress corrosion cracking in petrochemical service, and is non-magnetic. Supplied solution annealed at 1177°C (2150°F), it gives about 690 MPa minimum tensile and 276 MPa minimum yield strength at room temperature, with typical values of 720 / 324 MPa; it cannot be hardened by heat treatment. Its excellent formability and weldability make it one of the most widely used alloys for gas-turbine combustion liners, transition ducts, afterburner and exhaust parts, and industrial-furnace components. Because of its high molybdenum content, very high temperatures (around 1200°C) can cause accelerated oxidation in some conditions.

Nifty Alloys supplies Alloy X / 2.4665 from Dubai, UAE, in round bar, plate and sheet, solution annealed, with AMS 5754 bar and AMS 5536 plate / sheet supply on request. Every supply carries an EN 10204 3.1 Mill Test Certificate as standard; EN 10204 3.2 third-party inspection is available on request. We deliver across the UAE within 24–48 hours, to Saudi Arabia, Kuwait, Qatar, Oman and Bahrain within 3–5 working days, and export to Europe, India and Africa. Send your size list and specification to request a quote — quotations are turned around the same day. Hastelloy® is a registered trademark of its owner.

Chemical Composition

47 %
Ni

Nickel

22 %
Cr

Chromium

20.5 – 23 %

18.5 %
Fe

Iron

17 – 20 %

9 %
Mo

Molybdenum

8 – 10 %

1.5 %
Co

Cobalt

0.5 – 2.5 %

0.6 %
W

Tungsten

0.2 – 1 %

0.1 %
C

Carbon

0.05 – 0.15 %

Mn / Si

Manganese / Silicon

≤ 1 %

P

Phosphorus

≤ 0.04 %

S

Sulfur

≤ 0.03 %

B

Boron

≤ 0.01 %

Typical value Range (min–max) Minimum (≥) Maximum (≤) Hover / tap for notes

Standard

ASTM B572

Other

Revision: ASTM B572 — current edition

Available Forms

Plate / Block

5–75 mm. Thickness; cut to size. [VERIFY — stock range not confirmed]

Round Bar

6–165 mm. Diameter, solution annealed. [VERIFY — stock range not confirmed]

Sheet

0.5–3 mm. Thickness. [VERIFY — stock range not confirmed]

Stock & delivery

Stock location
Dubai, UAE
In stock
Solution Annealed [VERIFY — stocked forms]; AMS 5754 / 5536 material on request.
Delivery UAE
24–48 hours
Delivery GCC
3–5 working days — Saudi Arabia, Kuwait, Qatar, Oman, Bahrain
Export
Europe, India, Africa on request
Quotation
Same-day quotation
Minimum order
No minimum order quantity for standard sizes; cut pieces available

Key standards

ASTM B572

Designations & Equivalents

StandardDesignationNotes
UNSN06002Unified Numbering System — primary chemistry
EN / Werkstoff2.4665European material number
EN NameNiCr22Fe18MoEuropean alloy designation
AMSAMS 5754Bars, forgings, rings (Module 2)
AMSAMS 5536Sheet, strip and plate — aliases only
AMSAMS 5798Welding wire — aliases only
ASMESB-572 / SB-435ASME equivalents — aliases only
Common NameAlloy X / Nickel Alloy X / gas-turbine alloy / combustor alloyBuyer search terms (trademark used only in SEO / description / FAQ fields)

Compliance & Certification

StandardStatusNotes
EN 10204 3.1SuitableProvided as standard — chemistry, condition, tensile and hardness.
EN 10204 3.2ConditionalAvailable on request with independent third-party inspection — specify at order stage.
NACE MR0175 / ISO 15156Not Applicable — High-temperature oxidation alloy — not specified for sour service. For sour service, use Alloy 625, 718 or C-276.
AMS 5754ConditionalSupplied to AMS 5754 on request — confirm revision.
ASME Section II / VIIISuitableSB-435 / SB-572 material for pressure equipment.

Specifications

Mechanical Properties

Values per ASTM B572. Bar length compares conditions within each row.

PropertySolution Annealed | ASTM B572
Tensile Strength (UTS)690 MPaminTypical 720 MPaRoom tempASTM B572 minimum [VERIFY]; typical 720 MPa.
Tensile Strength (UTS)252 MPatypicalAt 871°CTypical elevated-temperature value.
Yield Strength (0.2% Proof Stress)276 MPaminTypical 324 MPaRoom tempASTM B572 minimum [VERIFY]; typical 324 MPa.
Elongation35 %minTypical 46 %50 mm / 4DMinimum; typical 46%.
Hardness241 HBmaxAMS 5754 barAMS 5754 maximum.

Physical Properties

PropertySolution Annealed | ASTM B572
Densityat 20°C8.22 g/cm³
Modulus of Elasticityat 20°C205 GPa
Thermal Conductivityat 20°C9.1 W/m·K
Coefficient of Thermal Expansionat 20–100°C13.9 µm/m·°C
Electrical Resistivityat 20°C1.18 µΩ·m

Service Conditions

Service Temperature

Min -196 °CMax 1100 °C

Notes

Oxidation resistance commonly quoted to 1100–1200°C (2000–2200°F); high molybdenum can cause accelerated oxidation around 1200°C in some conditions, so 1100°C is used here as the practical limit. Useful strength to about 1093°C; stress-rupture data typically quoted at 649–982°C. Tough at cryogenic temperatures.

Corrosion Performance

General corrosion

Excellent oxidation resistance and good resistance to reducing, carburising and nitriding atmospheres at high temperature; good resistance to chloride stress corrosion cracking in petrochemical applications.

Pitting resistance

Not normally selected for aqueous pitting service; for aggressive aqueous chlorides use Alloy 625 or C-276.

Additional notes

Not quoted — primarily a high-temperature alloy.

Heat Treatment

HEAT TREATMENT GUIDE — Alloy X / 2.4665 / UNS N06002

Not hardenable by heat treatment — solid-solution strengthened. Solution annealing (supply condition): 1177°C (2150°F), hold time by section, rapid cool (air or water); bright-annealed products cooled in hydrogen. Post-forming anneal: 1177°C, about 15 minutes per 3 mm of thickness, rapid air cool. Hot forming: start at about 1175°C (2150°F). Stress relief: not normally used — full solution anneal after severe forming. Welding: no preheat or PWHT required.

ENGINEERING NOTES
Weldability
Excellent

Readily welded by GTAW, GMAW, SMAW and resistance welding using matching ERNiCrMo-2 / ENiCrMo-2 fillers; keep interpass temperature low. No preheat required. After severe forming, anneal at 1177°C (about 15 minutes per 3 mm of thickness), rapid air cool.

Filler metals
  • ERNiCrMo-2 · AWS A5.14 / TIG (GTAW) / MIG (GMAW)Matching Alloy X filler wire (AMS 5798)
  • ENiCrMo-2 · AWS A5.11 / SMAWMatching covered electrode
Machinability
Poor

Work hardens rapidly — use rigid set-ups, sharp positive-rake carbide tools, low speeds, steady feed and generous coolant, as for other solid-solution nickel superalloys.

Applications

  • Gas-turbine combustion liners, cans and transition ducts
  • Afterburner, tailpipe and exhaust components
  • Land-based gas-turbine hot-section parts for GCC power plants
  • Aircraft cabin heaters and flame holders
  • Industrial-furnace rolls, retorts, muffles and baffles
  • Catalyst support grids and pyrolysis tubing
  • Heat-treatment fixtures and radiant tubes
  • Petrochemical flash-drier and reformer components
  • High-temperature fasteners and springs
  • Nuclear and high-temperature heat-exchanger components

Frequently Asked Questions

Quick answers on our grades, certification, supply and lead times.

Still have questions?

Our team responds fast with specifications, certification and stock availability.

Contact our team

Alloy X is used for high-temperature components: gas-turbine combustion liners and transition ducts, afterburner and exhaust parts, aircraft cabin heaters, industrial-furnace rolls, retorts and muffles, catalyst support grids, pyrolysis tubing and heat-treatment fixtures. In the UAE and GCC it is used in gas-turbine power generation, aerospace MRO and furnace applications.

Get in touch

Elevateyourprojectswithoursuperiorsteel