Nickel Alloys dealers in UAE

Inconel 718 / Alloy 718 / 2.4668 Nickel Alloy | Supplier in UAE & GCC

Alloy 718 / 2.4668 / UNS N07718 — precipitation-hardened Ni-Cr-Nb alloy: API 6ACRA 120K for sour service, AMS 5663 to 1241 MPa; wellhead and aerospace.

Industries Served

Oil & Gas
Aerospace & Defence
Power Generation
Marine
Heavy Engineering

Overview

Alloy 718 (UNS N07718, EN 2.4668 / NiCr19Fe19Nb5Mo3, ASTM B637, API 6ACRA, AMS 5662 / AMS 5663; widely known by the trade name Inconel 718) is a precipitation-hardenable nickel-chromium-iron alloy containing 50–55% nickel, 17–21% chromium, 4.75–5.50% niobium plus tantalum, 2.80–3.30% molybdenum and smaller additions of titanium and aluminium. Ageing precipitates the gamma-double-prime (Ni3Nb) phase, giving very high yield and tensile strength combined with good ductility, fatigue and creep-rupture strength from cryogenic temperatures to about 650°C, while chromium and molybdenum provide good corrosion resistance in sour and chloride environments. The alloy is supplied in three principal conditions: API 6ACRA 120K for oil and gas — 827–1000 MPa yield, 1034 MPa minimum tensile, 20% elongation, 32–40 HRC and low-temperature impact toughness, compatible with NACE MR0175 sour service; AMS 5663 for aerospace — 1034 MPa minimum yield, 1241 MPa minimum tensile and 36 HRC minimum; and AMS 5662 solution annealed for machining before ageing. Its slow ageing response gives outstanding resistance to post-weld strain-age cracking. A higher-strength API 6ACRA 150K version is available on request. Typical uses are wellhead and Christmas-tree components, hangers, valve stems, high-strength bolting, downhole tools, gas-turbine discs and casings, and rocket-engine parts.

Nifty Alloys supplies Alloy 718 / 2.4668 from Dubai, UAE, in round bar and forgings — API 6ACRA 120K as standard, with AMS 5663 aged, AMS 5662 solution-annealed and API 150K material on request. Every supply carries an EN 10204 3.1 Mill Test Certificate as standard, with chemistry, heat treatment, tensile, hardness and impact results; NACE MR0175 compliance statements and EN 10204 3.2 third-party inspection are available on request. We deliver across the UAE within 24–48 hours, to Saudi Arabia, Kuwait, Qatar, Oman and Bahrain within 3–5 working days, and export to Europe, India and Africa. Send your size list and specification to request a quote — quotations are turned around the same day. Inconel® is a registered trademark of its owner.

Chemical Composition

53 %
Ni

Nickel

50 – 55 %

19 %
Cr

Chromium

17 – 21 %

18 %
Fe

Iron

5.1 %
Nb + Ta

Niobium + Tantalum

4.75 – 5.5 %

3 %
Mo

Molybdenum

2.8 – 3.3 %

0.9 %
Ti

Titanium

0.65 – 1.15 %

0.5 %
Al

Aluminium

0.2 – 0.8 %

Co

Cobalt

≤ 1 %

0.03 %
C

Carbon

≤ 0.08 %

Mn / Si

Manganese / Silicon

≤ 0.35 %

P / S

Phosphorus / Sulfur

≤ 0.015 %

B / Cu

Boron / Copper

Typical value Range (min–max) Minimum (≥) Maximum (≤) Hover / tap for notes

Standard

API 6ACRA

Other

Revision: API 6ACRA — current edition

Available Forms

Forging

100–800 mm. Forged discs, rings and blocks to order. [VERIFY — supply range not confirmed]

Round Bar

12–355 mm. Diameter, API 6ACRA 120K; AMS 5663 properties to 254 mm. [VERIFY — stock range not confirmed]

Stock & delivery

Stock location
Dubai, UAE
In stock
API 6ACRA 120K bar [VERIFY — stocked forms]; AMS 5663, AMS 5662 and API 150K on request.
Delivery UAE
24–48 hours
Delivery GCC
3–5 working days — Saudi Arabia, Kuwait, Qatar, Oman, Bahrain
Export
Europe, India, Africa on request
Quotation
Same-day quotation
Minimum order
No minimum order quantity for standard sizes; cut pieces available

Key standards

API 6ACRA

Designations & Equivalents

StandardDesignationNotes
UNSN07718Unified Numbering System — primary chemistry
EN / Werkstoff2.4668European material number
EN NameNiCr19Fe19Nb5Mo3European alloy designation
Common Name6ACRA 120K / 150K(API) 120K = SpecSheet 1; 150K (≥ 1034 MPa yield, ≤ 45 HRC) on request
AMSAMS 5663 / AMS 5662Bar, forgings, rings — aged / solution treated (Module 2)
AMSAMS 5596 / AMS 5597Sheet, strip and plate — aliases only
ASMESB-637ASME equivalent of ASTM B637
JISNCF 718Japanese Industrial Standard
ISONW7718ISO 9722 designation
Common NameAlloy 718 / Nickel 718 / 718 API / 718 120K / IN718Buyer search terms (trademark used only in SEO / description / FAQ fields)

Compliance & Certification

StandardStatusNotes
EN 10204 3.1SuitableProvided as standard — chemistry, heat treatment, tensile, hardness and impact.
EN 10204 3.2ConditionalAvailable on request with independent third-party inspection — specify at order stage.
NACE MR0175 / ISO 15156SuitableAPI 6ACRA 120K material (≤ 40 HRC) acceptable under ISO 15156-3 within the applicable environmental limits [VERIFY — current edition]. AMS 5663 (≥ 36 HRC, no upper limit) is not NACE-certified unless hardness is controlled.
API 6ACRASuitable120K supplied as standard (SpecSheet 1); 150K on request.
AMS 5662 / AMS 5663ConditionalSupplied to AMS 5662 or AMS 5663 on request — confirm revision.
ASME Section II / VIIIConditionalSB-637 material for ASME applications [VERIFY — code case scope].

Specifications

Mechanical Properties

Values per API 6ACRA. Bar length compares conditions within each row.

PropertyAPI 6ACRA 120K | API 6ACRASolution Annealed + Aged | AMS 5663Solution Annealed | AMS 5662
Yield Strength (0.2% Proof Stress)827–1000 MPaRoom tempAPI 6ACRA range (120–145 ksi).1034 MPamin≤ 127 mmAMS 5663 minimum (150 ksi).–
Tensile Strength (UTS)1034 MPaminRoom tempAPI 6ACRA minimum (150 ksi).1241 MPamin≤ 127 mmAMS 5663 minimum (180 ksi).1034 MPamaxSolution annealedTypical maximum [VERIFY].
Elongation20 %min4DAPI 6ACRA minimum.12 %min4DAMS 5663 minimum.30 %min4DTypical minimum [VERIFY].
Reduction of Area35 %min≤ 254 mmAPI 6ACRA minimum (25% > 254 mm).15 %minAMS 5663 minimum.–
Hardness32–40 HRCRoom tempAPI 6ACRA range; NACE maximum 40 HRC.36 HRCminAMS 5663 minimum (331 HB).25 HRCmaxSolution annealedTypical maximum [VERIFY — AMS 5662 limit].
Impact Energy (Charpy V-notch)68 Jmin≤ −60°C, longitudinal, < 76 mmAverage minimum (61 J single).––

Physical Properties

PropertyAPI 6ACRA 120K | API 6ACRASolution Annealed + Aged | AMS 5663Solution Annealed | AMS 5662
Densityat 20°C8.23 g/cm³8.23 g/cm³8.23 g/cm³
Modulus of Elasticityat 20°C200 GPa200 GPa200 GPa
Thermal Conductivityat 20°C11.1 W/m·K11.1 W/m·K11.1 W/m·K
Coefficient of Thermal Expansionat 20–100°C12.1 µm/m·°C12.1 µm/m·°C12.1 µm/m·°C
Specific Heat Capacityat 20°C435 J/kg·K435 J/kg·K435 J/kg·K
Electrical Resistivityat 20°C1.25 µΩ·m1.25 µΩ·m1.25 µΩ·m

Service Conditions

Service Temperature

Min -253 °CMax 650 °C

Notes

Retains high strength and creep-rupture properties to about 650°C; usable from cryogenic temperatures (about −253°C). Above about 650°C the gamma-double-prime phase overages and strength falls. API 6ACRA material is impact tested at or below −60°C.

Corrosion Performance

PREN 29

General corrosion

Good resistance to sour (H2S / CO2) environments, chloride SCC and many organic and inorganic media; acceptable in sour service within NACE MR0175 / ISO 15156-3 hardness and environmental limits. Lower corrosion resistance than Alloy 625 in most environments.

Pitting resistance

Good pitting resistance in sour brines and many process environments; for warm seawater crevice service Alloy 625 is preferred.

PREN notes

PREN ≈ 28–30 (Cr + 3.3Mo) — lower than Alloy 625 (≈ 51).

Heat Treatment

HEAT TREATMENT GUIDE — Alloy 718 / 2.4668 / UNS N07718

API 6ACRA 120K: solution anneal at about 1021–1052°C (1–2.5 h), rapid cool; age at about 774–802°C for 6–8 h, air cool (or two-step age per approved procedure) — 827–1000 MPa yield, 32–40 HRC. AMS 5663: solution treat at 940–1010°C (1725–1850°F), rapid cool; age at 718°C (1325°F) for 8 h, furnace cool at about 55°C/h to 621°C (1150°F) and hold for a total ageing time of 18 h, air cool — ≥ 1034 MPa yield, ≥ 36 HRC. AMS 5662: solution treated only — machine, then age to the required condition. API 150K: higher-strength ageing to ≥ 1034 MPa yield, ≤ 45 HRC (on request). Welding: weld solution annealed, then re-solution treat and age.

ENGINEERING NOTES
Weldability
Good

Welds well by GTAW, GMAW and EBW using matching ERNiFeCr-2 filler; the slow ageing response gives excellent resistance to strain-age cracking. Weld in the solution-annealed condition, then re-solution treat and age to restore full properties. For sour service, weld procedures must re-establish the required hardness range.

Filler metals
  • ERNiFeCr-2 · AWS A5.14 / TIG (GTAW) / MIG (GMAW)Matching age-hardenable 718 filler
  • ERNiCrMo-3 · AWS A5.14 / TIG / MIGAlloy 625-type filler for non-aged or dissimilar joints
Machinability
Poor

Difficult to machine — very high strength and work hardening. Rough machine in the solution-annealed condition, then age and finish. Use rigid machines, sharp carbide or ceramic tooling, low speeds and generous coolant.

Applications

  • Wellhead and Christmas-tree components, tubing hangers and valve bodies (API 6ACRA)
  • Valve stems, gates, seats and actuator parts for GCC sour-gas fields
  • Downhole tools, packers, completion and safety-valve components
  • High-strength bolting, studs and fasteners
  • Gas-turbine discs, shafts, casings and rings (AMS 5663)
  • Rocket-engine and spacecraft components
  • Subsea connectors, couplings and pressure-containing parts
  • Pump shafts and high-load rotating parts in corrosive service
  • Nuclear and cryogenic structural components
  • Springs and high-temperature fasteners

Related grades in Nickel Alloys

Frequently Asked Questions

Quick answers on our grades, certification, supply and lead times.

Still have questions?

Our team responds fast with specifications, certification and stock availability.

Contact our team

Alloy 718 is used where very high strength and corrosion resistance are needed together: wellhead and Christmas-tree components, tubing hangers, valve stems, downhole tools, high-strength bolting, gas-turbine discs and casings, rocket-engine parts and subsea connectors. In the UAE and GCC it is a key alloy for sour-gas and high-pressure oil and gas equipment.

Get in touch

Elevateyourprojectswithoursuperiorsteel