Bronze dealers in UAE

C65500 / CuSi3Mn1 / CW116C Silicon Bronze | Supplier in UAE & GCC

C65500 / CuSi3Mn1 / CW116C — High-Silicon Bronze A: strong, easily welded, seawater-resistant rod for marine fasteners, pump shafts and valve stems.

Industries Served

Marine
Electrical
Petrochemical
Construction
Manufacturing

Overview

C65500 silicon bronze (EN CuSi3Mn1 / CW116C; formerly BS CS101 and DIN 2.1525; CDA 655, "High-Silicon Bronze A"; ASTM B98) is a wrought single-phase alpha copper alloy containing at least 94.8% copper, 2.8–3.8% silicon and 0.50–1.3% manganese, with iron, zinc, nickel and lead held to low limits. Silicon strengthens the copper and acts as an efficient deoxidiser, while manganese adds further strength, giving mechanical properties comparable to mild steel together with high ductility. Because it is a high-copper single-phase alloy it has excellent corrosion resistance in fresh water, seawater and polluted waters, brines, sulphite solutions, non-oxidising inorganic acids, alkalis and many organic chemicals, and good resistance to stress corrosion cracking. It has the best weldability of the copper alloys and excellent hot and cold workability, although like stainless steel it work hardens rapidly. Typical hard-drawn (H04) rod reaches about 485–690 MPa tensile and 85–100 HRB, while annealed (O60) material gives about 360–485 MPa with high elongation for severe cold forming. Electrical conductivity is low (about 7% IACS). Typical uses are marine fasteners, bolts and nuts, pump shafts, valve stems, tie rods, pole-line hardware, welded tanks and pressure vessels, architectural hardware and sculpture.

Nifty Alloys supplies C65500 / CuSi3Mn1 silicon bronze from Dubai, UAE, in round bar and flat bar — H04 hard as standard and O60 annealed on request. Every supply carries an EN 10204 3.1 Mill Test Certificate as standard; EN 10204 3.2 third-party inspection is available on request. We deliver across the UAE within 24–48 hours, to Saudi Arabia, Kuwait, Qatar, Oman and Bahrain within 3–5 working days, and export to Europe, India and Africa. Send your size list and temper to request a quote — quotations are turned around the same day.

Chemical Composition

95.8 %
Cu

Copper

≥ 94.8 %

3.3 %
Si

Silicon

2.8 – 3.8 %

0.9 %
Mn

Manganese

0.5 – 1.3 %

Fe

Iron

≤ 0.8 %

Zn

Zinc

≤ 1.5 %

Ni

Nickel

≤ 0.6 %

Pb

Lead

≤ 0.05 %

Typical value Range (min–max) Minimum (≥) Maximum (≤) Hover / tap for notes

Standard

ASTM B98 / B98M

Other

Revision: ASTM B98 / B98M — current edition

Available Forms

Flat Bar

3–50 mm. Thickness; width to order. [VERIFY — stock range not confirmed]

Round Bar

6–100 mm. Diameter, H04 / O60. [VERIFY — stock range not confirmed]

Stock & delivery

Stock location
Dubai, UAE
In stock
H04 hard bar [VERIFY — stocked sizes]; O60 annealed on request.
Delivery UAE
24–48 hours
Delivery GCC
3–5 working days — Saudi Arabia, Kuwait, Qatar, Oman, Bahrain
Export
Europe, India, Africa on request
Quotation
Same-day quotation
Minimum order
No minimum order quantity for standard sizes; cut pieces available

Key standards

ASTM B98 / B98M

Designations & Equivalents

StandardDesignationNotes
UNSC65500Primary chemistry (ASTM B98)
EN NameCuSi3Mn1EN 12163 designation
EN / WerkstoffCW116C(EN Number) EN numerical designation
BSCS101Former British designation
DIN2.1525Former German material number
Common Name655(CDA) High-Silicon Bronze A
Common NameB96 / B124 / F467 / F468 / SB-98(ASTM / ASME) Plate-sheet, forging stock, fasteners and ASME — aliases only
Common NameQQ-C-591 / J461 / J463(Federal / SAE) Federal and SAE references — aliases only
Common NameNone confirmed(AMS / MIL) No AMS or MIL specification confirmed
Common NameSilicon bronze / high-silicon bronze / C655 / CuSi3Mn1 barBuyer search terms (proprietary trade names excluded)

Compliance & Certification

StandardStatusNotes
EN 10204 3.1SuitableProvided as standard — chemistry, temper and mechanical properties.

Specifications

Mechanical Properties

Values per ASTM B98 / B98M. Bar length compares conditions within each row.

PropertyH04 Hard | ASTM B98O60 Annealed | ASTM B98
Tensile Strength (UTS)485–690 MPaH04Typical range [VERIFY B98 minimum].360–485 MPaO60Typical range [VERIFY].
Yield Strength (0.5% Ext.)260–380 MPaH04Typical range [VERIFY].105–260 MPaO60Typical range [VERIFY].
Elongation8–17 %50 mmTypical range.25–60 %50 mmTypical range.
Hardness85–100 HRBH04Typical range.–

Physical Properties

PropertyH04 Hard | ASTM B98O60 Annealed | ASTM B98
Densityat 20°C8.53 g/cm³8.53 g/cm³
Modulus of Elasticityat 20°C117 GPa117 GPa
Thermal Conductivityat 20°C36 W/m·K36 W/m·K
Coefficient of Thermal Expansionat 20–300°C18 µm/m·°C18 µm/m·°C
Specific Heat Capacityat 20°C377 J/kg·K377 J/kg·K
Electrical Conductivityat 20°C7 % IACS7 % IACS

Service Conditions

Service Temperature

Min -196 °CMax 200 °C

Notes

Cold-worked tempers soften above about 200°C [VERIFY]. Retains toughness at cryogenic temperatures. Melting range about 970–1025°C.

Corrosion Performance

General corrosion

Resists brines, sulphite solutions, non-oxidising inorganic acids, alkalis, salts and organic chemicals; good stress corrosion cracking resistance. Avoid oxidising acids and ammonia. Use silicon-bronze fasteners and filler to limit galvanic effects.

Pitting resistance

Excellent resistance in seawater, fresh water and polluted waters.

Additional notes

Not applicable — PREN is not used for copper alloys.

Heat Treatment

HEAT TREATMENT GUIDE — C65500 / CuSi3Mn1 / CW116C

Not hardenable by heat treatment — strength from cold work (H04). Annealing (O60): about 475–700°C [VERIFY]. Stress relieving: about 290–370°C [VERIFY]. Hot working: excellent (about 700–875°C). Cold working: excellent, but work hardens rapidly — intermediate anneals for severe forming.

ENGINEERING NOTES
Weldability
Excellent

Best weldability of the copper alloys — readily welded by GTAW, GMAW, SMAW and oxy-acetylene, and brazed and soldered. Use silicon-bronze filler (ERCuSi-A); an all-silicon-bronze construction minimises galvanic corrosion. Low thermal conductivity simplifies heat control.

Filler metals
  • ERCuSi-A · AWS A5.7 / TIG (GTAW) / MIG (GMAW)Matching silicon-bronze filler wire
  • ECuSi · AWS A5.6 / SMAWSilicon-bronze covered electrode
  • BAg series · AWS A5.8 / BrazingSilver brazing alloys
Machinability
Fair

Machinability about 30 (free-cutting brass = 100). Work hardens rapidly, like stainless steel — use sharp tools, positive rake, steady feeds and coolant; avoid dwelling.

Applications

  • Marine fasteners, bolts, nuts, screws and rivets (ASTM F467 / F468)
  • Pump shafts and valve stems
  • Tie rods and structural hardware
  • Electrical pole-line hardware and clamps
  • Welded tanks, pressure vessels and heat-exchanger parts
  • Marine fittings and boat hardware for GCC vessels
  • Piston rings, bushings and wear plates
  • Architectural hardware, hinges and decorative metalwork
  • Sculptures and art castings
  • Chemical-plant components in brines and non-oxidising acids

Frequently Asked Questions

Quick answers on our grades, certification, supply and lead times.

Still have questions?

Our team responds fast with specifications, certification and stock availability.

Contact our team

C65500 is used for marine fasteners, bolts and nuts, pump shafts, valve stems, tie rods, pole-line hardware, welded tanks and pressure vessels, marine fittings, architectural hardware and sculpture. In the UAE and GCC it is popular for marine fasteners and fabricated, welded components.

Get in touch

Elevateyourprojectswithoursuperiorsteel