Bronze dealers in UAE

C67500 / CDA 675 Manganese Bronze | Supplier in UAE & GCC

C67500 / CDA 675 — wrought Manganese Bronze A: high-strength, hot-forgeable, low-lead rod for shafts, valve stems, pump rods, bolts and marine fittings.

Industries Served

Marine
Automotive
Manufacturing
Construction

Overview

C67500 manganese bronze (CDA 675, "Manganese Bronze A"; nominally CuZn37FeSnMn; ASTM B138, B124, B283, F467 / F468; QQ-B-728) is a wrought copper-zinc alloy containing 57.0–60.0% copper, 0.8–2.0% iron, 0.5–1.5% tin and 0.05–0.50% manganese, with lead held to 0.20% maximum, aluminium to 0.25% and zinc the remainder. Despite its traditional name it is metallurgically a high-strength alpha-beta brass: iron refines the grain and raises strength, tin improves corrosion resistance — particularly in mildly acidic waters — and manganese adds strength and deoxidises the melt. It combines moderately high strength, rigidity and good torsional properties with abrasion resistance and good general corrosion resistance to dry gases, dilute alkalis, sulphides and most organic solvents. It has excellent hot workability and closed-die forgeability (forgeability rating 80) but poor cold workability, and it solders and brazes excellently. Half-hard (H02) rod to ASTM B138 requires 500 MPa minimum tensile and 250 MPa yield up to 25 mm, falling to 450 / 220 MPa above 65 mm, with 13–17% elongation; typical 25 mm H02 rod reaches about 580 MPa tensile, 414 MPa yield and 90 HRB. Contact with ammonia, mercury and chlorine gases should be avoided. Typical uses are shafting, pump rods, valve stems and bodies, clutch discs, bolts and nuts, forged valves and connectors, and marine and architectural hardware.

Nifty Alloys supplies C67500 manganese bronze from Dubai, UAE, in half-hard (H02) round bar to ASTM B138, with forging stock to ASTM B124 on request. Every supply carries an EN 10204 3.1 Mill Test Certificate as standard; EN 10204 3.2 third-party inspection is available on request. We deliver across the UAE within 24–48 hours, to Saudi Arabia, Kuwait, Qatar, Oman and Bahrain within 3–5 working days, and export to Europe, India and Africa. Send your size list to request a quote — quotations are turned around the same day.

Chemical Composition

58.5 %
Cu

Copper

57 – 60 %

39 %
Zn

Zinc

1.4 %
Fe

Iron

0.8 – 2 %

1 %
Sn

Tin

0.5 – 1.5 %

0.1 %
Mn

Manganese

0.05 – 0.5 %

Pb

Lead

≤ 0.2 %

Al

Aluminium

≤ 0.25 %

Typical value Range (min–max) Minimum (≥) Maximum (≤) Hover / tap for notes

Standard

ASTM B138 / B138M

Other

Revision: ASTM B138 / B138M — current edition

Available Forms

Round Bar

6–100 mm. Diameter, H02. [VERIFY — stock range not confirmed]

Stock & delivery

Stock location
Dubai, UAE
In stock
H02 round bar [VERIFY — stocked sizes]; B124 forging stock on request.
Delivery UAE
24–48 hours
Delivery GCC
3–5 working days — Saudi Arabia, Kuwait, Qatar, Oman, Bahrain
Export
Europe, India, Africa on request
Quotation
Same-day quotation
Minimum order
No minimum order quantity for standard sizes; cut pieces available

Key standards

ASTM B138 / B138M

Designations & Equivalents

StandardDesignationNotes
UNSC67500Primary chemistry (ASTM B138)
Common Name675(CDA) Copper Development Association number
Common NameManganese Bronze A / Alloy A(Common) Traditional names (ASTM "Type A" — legacy)
Common NameCuZn37FeSnMn(Nominal) Nominal composition designation (not EN-registered)
Common NameCW721R (CuZn40Mn1Pb1AlFeSn) / CZ114(EN / BS (nearest)) Nearest only — about 1% Pb vs ≤ 0.20% in C67500
Common NameB124 / B283 / F467 / F468 / SB-283 / SF-467 / SF-468(ASTM / ASME) Forging stock, forgings and fasteners — aliases only
Common NameQQ-B-728 / J461 / J463 / CA675(Federal / SAE) Federal and SAE references — aliases only
Common NameNone(AMS / MIL) No AMS or MIL specification applies
Common NameManganese bronze rod / high-strength yellow brass / C675 bronzeBuyer search terms

Compliance & Certification

StandardStatusNotes
EN 10204 3.1SuitableProvided as standard — chemistry, temper and mechanical properties.

Specifications

Mechanical Properties

Values per ASTM B138 / B138M. Bar length compares conditions within each row.

PropertyH02 Half Hard | ASTM B138
Tensile Strength (UTS)500 MPaminTypical 580 MPaRod ≤ 25 mmASTM B138 minimum (72 ksi); typical 84 ksi.
Tensile Strength (UTS)450 MPaminRod > 25 mmASTM B138 minimum; yield 240 MPa (25–65 mm) / 220 MPa (> 65 mm); El. 15–17%.
Yield Strength (0.5% Ext.)250 MPaminTypical 414 MPaRod ≤ 25 mmASTM B138 minimum (36 ksi).
Elongation13 %minTypical 19 %Rod ≤ 25 mmASTM B138 minimum.
Hardness90 HRBtypicalH02, 25 mmTypical.

Physical Properties

PropertyH02 Half Hard | ASTM B138
Densityat 20°C8.36 g/cm³
Modulus of Elasticityat 20°C103 GPa
Thermal Conductivityat 20°C106 W/m·K
Coefficient of Thermal Expansionat 20–100°C21.2 µm/m·°C
Specific Heat Capacityat 20°C377 J/kg·K
Electrical Conductivityat 20°C24 % IACS

Service Conditions

Service Temperature

Min -40 °CMax 200 °C

Notes

Cold-worked H02 temper softens progressively above about 200°C [VERIFY]. Hot working / forging range 621–788°C. Melting range about 866–888°C.

Corrosion Performance

General corrosion

Withstands dry gases, dilute alkalis, sulphides and most organic solvents and acids. Avoid ammonia, mercury and chlorine gases. As a high-zinc alpha-beta alloy it can dezincify in stagnant seawater — aluminium or nickel-aluminium bronzes are preferred for seawater.

Pitting resistance

Good general corrosion resistance; tin improves resistance in mildly acidic waters.

Additional notes

Not applicable — PREN is not used for copper alloys.

Heat Treatment

HEAT TREATMENT GUIDE — C67500 / CDA 675

Not hardenable by heat treatment — strength from cold work (H02). Annealing: about 425–600°C [VERIFY]. Stress relieving: about 200–300°C [VERIFY]. Hot working / forging: 621–788°C (1150–1450°F) — excellent hot forgeability (rating 80). Cold working: poor — limited cold reductions.

ENGINEERING NOTES
Weldability
Good

Soldering and brazing excellent; oxy-acetylene welding good; gas-shielded arc welding fair; resistance spot and butt welding good; coated-metal arc welding not recommended. Zinc fuming requires ventilation.

Filler metals
  • RBCuZn-B · AWS A5.27 / Oxy-acetylene / BrazingManganese-bronze (low-fuming) brazing / welding rod
  • ERCuAl-A2 · AWS A5.7 / TIG / MIGAluminium-bronze filler for gas-shielded arc repairs
  • BAg series · AWS A5.8 / BrazingSilver brazing alloys
Machinability
Fair

Machinability rating about 30 (free-cutting brass = 100). For high-volume machined parts, leaded C67600 or free-cutting brass CuZn39Pb3 are alternatives.

Applications

  • Shafting and pump rods
  • Valve stems and valve bodies
  • Bolts, nuts and studs (ASTM F467 / F468)
  • Closed-die forged valves, fittings and connectors
  • Automotive clutch discs and drive components
  • Bushings and wear parts
  • Marine hardware and fittings for GCC vessels
  • Architectural hardware and fixtures
  • Balls and general hardware
  • Brazed assemblies and fabricated components

Frequently Asked Questions

Quick answers on our grades, certification, supply and lead times.

Still have questions?

Our team responds fast with specifications, certification and stock availability.

Contact our team

C67500 is used for shafting, pump rods, valve stems and bodies, bolts and nuts, closed-die forged valves and connectors, automotive clutch discs, bushings, and marine and architectural hardware. In the UAE and GCC it is supplied for machined and forged hardware where strength and good corrosion resistance are needed.

Get in touch

Elevateyourprojectswithoursuperiorsteel