Nickel Alloys dealers in UAE

Monel 405 / Alloy 405 / UNS N04405 Nickel-Copper Alloy | Supplier in UAE & GCC

Alloy 405 / UNS N04405 — free-machining nickel-copper alloy: Alloy 400 corrosion resistance with added sulphur for screw-machine stock; valves, fasteners.

Industries Served

Marine
Petrochemical
Manufacturing
Oil & Gas

Overview

Alloy 405 (UNS N04405, ASTM B164, AMS 4674; widely known by the trade names Monel 405 and Monel R-405) is the free-machining version of Alloy 400. It has the same nickel-copper base — at least 63% nickel and 28.0–34.0% copper — with a controlled sulphur addition of 0.025–0.060%. The sulphur forms nickel-copper sulphide inclusions that act as chip breakers, so Alloy 405 machines faster and with better chip control than Alloy 400, which makes it the standard choice for automatic screw-machine parts. Corrosion resistance and physical properties are essentially the same as Alloy 400: excellent resistance to flowing seawater, steam, alkalis, salts, hydrofluoric acid and de-aerated sulphuric and hydrochloric acids, and virtual immunity to chloride stress corrosion cracking; like 400 it is attacked by nitric acid, ammonia and oxidising salts. Mechanical properties differ slightly: ASTM B164 requires 480 MPa minimum tensile and 170 MPa yield annealed, and 586 / 345 MPa cold drawn and stress relieved. The sulphur reduces weldability and hot workability, so 405 is not recommended for forging or critical welded parts. Typical uses are valve and pump parts, fasteners, meter components, marine fittings and screw-machined parts for seawater and chemical service.

Nifty Alloys supplies Alloy 405 from Dubai, UAE, in round and hexagonal bar, annealed or cold drawn and stress relieved, with AMS 4674 supply on request. Every supply carries an EN 10204 3.1 Mill Test Certificate as standard; EN 10204 3.2 third-party inspection is available on request. We deliver across the UAE within 24–48 hours, to Saudi Arabia, Kuwait, Qatar, Oman and Bahrain within 3–5 working days, and export to Europe, India and Africa. Send your size list and condition to request a quote — quotations are turned around the same day. Monel® is a registered trademark of its owner.

Chemical Composition

66 %
Ni

Nickel

≥ 63 %

31 %
Cu

Copper

28 – 34 %

1.5 %
Fe

Iron

≤ 2.5 %

1 %
Mn

Manganese

≤ 2 %

0.1 %
C

Carbon

≤ 0.3 %

Si

Silicon

≤ 0.5 %

0.043 %
S

Sulfur

0.025 – 0.06 %

Typical value Range (min–max) Minimum (≥) Maximum (≤) Hover / tap for notes

Standard

ASTM B164

Other

Revision: ASTM B164 — current edition

Available Forms

Hexagonal Bar

6–75 mm. Across flats, cold drawn. [VERIFY — stock range not confirmed]

Round Bar

6–150 mm. Diameter, annealed or cold drawn. [VERIFY — stock range not confirmed]

Stock & delivery

Stock location
Dubai, UAE
In stock
Annealed and cold drawn bar [VERIFY — stocked conditions]; AMS 4674 on request.
Delivery UAE
24–48 hours
Delivery GCC
3–5 working days — Saudi Arabia, Kuwait, Qatar, Oman, Bahrain
Export
Europe, India, Africa on request
Quotation
Same-day quotation
Minimum order
No minimum order quantity for standard sizes

Key standards

ASTM B164

Designations & Equivalents

StandardDesignationNotes
UNSN04405Unified Numbering System — primary designation
EN / Werkstoff2.4363Quoted by some sources (others quote 2.4361, the low-carbon Alloy 400 number) [VERIFY]
AMSAMS 4674Free-machining bar and forgings (Module 2)
Common NameQQ-N-281 Class B(Federal) Legacy US federal specification — aliases only
Common NameMIL-N-894(MIL) Legacy military specification — aliases only [VERIFY]
ASTMF467 / F468Nuts / bolts in nickel-copper alloy — aliases only
ASMESB-164ASME equivalent — aliases only
Common NameAlloy 405 / Nickel 405 / free-machining nickel-copper / 405 screw-machine stockBuyer search terms (trademark used only in SEO / description / FAQ fields)

Compliance & Certification

StandardStatusNotes
EN 10204 3.1SuitableProvided as standard — chemistry, condition and mechanical properties.
EN 10204 3.2ConditionalAvailable on request with independent third-party inspection — specify at order stage.
NACE MR0175 / ISO 15156Requires ConfirmationOne stockist lists MR0175 for 405 bar; listing and limits not confirmed for the sulphur-bearing grade [VERIFY]. For sour service, Alloy 400 or K-500 are normally specified.
AMS 4674ConditionalSupplied to AMS 4674 on request — confirm revision.
ASME Section IISuitableSB-164 material.

Specifications

Mechanical Properties

Values per ASTM B164. Bar length compares conditions within each row.

PropertyAnnealed | ASTM B164Cold Drawn / Stress Relieved | ASTM B164
Tensile Strength (UTS)480 MPaminAnnealedASTM B164 minimum (70 ksi).586 MPaminCold drawn / stress relievedASTM B164 minimum (85 ksi).
Yield Strength (0.2% Proof Stress)170 MPaminAnnealedASTM B164 minimum (25 ksi).345 MPaminCold drawn / stress relievedASTM B164 minimum (50 ksi).
Elongation35 %min50 mm / 4DASTM B164 minimum.8–15 %Size dependentASTM B164 minimum range [VERIFY].
Hardness60–75 HRBAnnealedFor information.90 HRBminCold drawnFor information.

Physical Properties

PropertyAnnealed | ASTM B164Cold Drawn / Stress Relieved | ASTM B164
Densityat 20°C8.8 g/cm³8.8 g/cm³
Modulus of Elasticityat 20°C179 GPa179 GPa
Thermal Conductivityat 20°C21.8 W/m·K21.8 W/m·K
Coefficient of Thermal Expansionat 20–100°C13.9 µm/m·°C13.9 µm/m·°C
Specific Heat Capacityat 20°C427 J/kg·K427 J/kg·K
Electrical Resistivityat 20°C0.51 µΩ·m0.51 µΩ·m

Service Conditions

Service Temperature

Min -196 °CMax 480 °C

Notes

As Alloy 400 — good properties from subzero temperatures to about 480°C in oxidising air. Avoid sulphur-bearing atmospheres at elevated temperature.

Corrosion Performance

General corrosion

Essentially the same as Alloy 400: excellent resistance to seawater, steam, alkalis, salts, HF and de-aerated sulphuric / hydrochloric acids; virtually immune to chloride SCC. Attacked by nitric acid, ammonia and oxidising salts (ferric, cupric chlorides).

Pitting resistance

As Alloy 400 — excellent in flowing seawater; pitting possible in stagnant seawater or under deposits.

Additional notes

Not applicable — PREN is not meaningful for nickel-copper alloys.

Heat Treatment

HEAT TREATMENT GUIDE — Alloy 405 / UNS N04405

Not hardenable by heat treatment — strength increased only by cold work. Annealing: about 870°C, air cool or quench (as Alloy 400). Stress relieving: about 540–650°C after cold drawing or machining. Hot working: limited — sulphur reduces hot workability; not recommended for forging. Welding: non-critical joints only (see 7.8).

ENGINEERING NOTES
Weldability
Fair

Weldable by GTAW, GMAW and SMAW with ERNiCu-7 / ENiCu-7 fillers for non-critical joints, but the sulphur addition increases hot-cracking risk — not recommended for critical or pressure-retaining welds; specify Alloy 400 for welded parts. No PWHT normally required; joints must be clean.

Filler metals
  • ERNiCu-7 · AWS A5.14 / TIG (GTAW) / MIG (GMAW)Nickel-copper filler — non-critical joints only
  • ENiCu-7 · AWS A5.11 / SMAWNickel-copper covered electrode
Machinability
Excellent

Designed for automatic screw machines — sulphide inclusions break chips and allow faster speeds and longer tool life than Alloy 400. Best results in the cold-drawn condition with sharp, positive-rake tools and generous coolant.

Applications

  • Automatic screw-machine parts and high-volume turned components
  • Valve stems, seats and trim for seawater and chemical service
  • Pump shafts, impellers and wear parts in seawater
  • Fasteners, nuts and bolts (ASTM F467 / F468)
  • Meter and instrument parts
  • Marine fittings and hardware for GCC vessels
  • Hex-bar fittings and adaptors
  • Components for HF-acid and alkali handling equipment
  • Aerospace hardware to AMS 4674
  • Heat-exchanger and refinery machined components

Frequently Asked Questions

Quick answers on our grades, certification, supply and lead times.

Still have questions?

Our team responds fast with specifications, certification and stock availability.

Contact our team

Alloy 405 is used mainly for automatic screw-machine parts: valve stems and trim, pump shafts and wear parts, fasteners, meter components, marine fittings and hex-bar fittings for seawater and chemical service. In the UAE and GCC it is supplied to machine shops producing high-volume corrosion-resistant components.

Get in touch

Elevateyourprojectswithoursuperiorsteel