Tool Steel dealers in UAE

M42 / 1.3247 / HS2-9-1-8 Cobalt High Speed Steel | Supplier in UAE & GCC

M42 / 1.3247 / HS2-9-1-8 — 8% cobalt super high speed steel: 277 HB max annealed, 67–69 HRC hardened, superior red hardness for cutting tough alloys.

Industries Served

Manufacturing
Aerospace & Defence
Automotive
Mould & Die

Overview

M42 (AISI M42 to ASTM A600; 1.3247 / HS2-9-1-8 to EN ISO 4957; JIS SKH59; BS BM42) is a molybdenum-based super high speed steel alloyed with about 8% cobalt. 1.3247 contains 1.05–1.15% carbon, 9.0–10.0% molybdenum, 7.5–8.5% cobalt, 3.5–4.5% chromium, 1.2–1.9% tungsten and 0.9–1.3% vanadium. The high carbon and molybdenum give a large volume of hard carbides and a very high hardened hardness, while cobalt raises the hot hardness of the matrix so the cutting edge stays hard at higher tool temperatures than cobalt-free grades such as M2. Hardened from 1170–1210°C and tempered three or four times at about 530–560°C, it reaches 67–69 HRC through secondary hardening. The relatively low vanadium content keeps it easy to grind for its hardness class. M42 is the standard choice for cutting difficult-to-machine materials — stainless steels, nickel and titanium alloys, high-strength and hardened steels — in drills, end mills, taps, reamers, broaches, form cutters and bandsaw edges. It is supplied soft annealed for machining.

Nifty Alloys supplies M42 / 1.3247 cobalt high speed steel to order from Dubai, UAE, in round bar, soft annealed. Every supply is dispatched with EN 10204 3.1 Mill Test Certificates as standard, certifying EN ISO 4957 or ASTM A600 chemistry (as supplied), delivery condition and hardness with full traceability to the mill; EN 10204 3.2 third-party inspection is available on request. We deliver across the UAE, to Saudi Arabia, Kuwait, Qatar, Oman and Bahrain, and export to Europe, India and Africa, with lead time confirmed at quotation. Send your size list or drawing to request a quote — quotations are turned around the same day.

Chemical Composition

1.1 %
C

Carbon

1.05 – 1.15 %

0.3 %
Si

Silicon

≤ 0.7 %

0.3 %
Mn

Manganese

≤ 0.4 %

9.5 %
Mo

Molybdenum

9 – 10 %

8 %
Co

Cobalt

7.5 – 8.5 %

3.9 %
Cr

Chromium

3.5 – 4.5 %

1.5 %
W

Tungsten

1.2 – 1.9 %

1.1 %
V

Vanadium

0.9 – 1.3 %

P

Phosphorus

≤ 0.03 %

S

Sulfur

≤ 0.03 %

Typical value Range (min–max) Minimum (≥) Maximum (≤) Hover / tap for notes

Standard

EN ISO 4957

EN

Revision: EN ISO 4957 — current edition

Tool steels — specification for chemical composition, heat treatment, and properties of tool steels including cold work, hot work, and high-speed grades.

Published as BS EN ISO 4957; leading BS dropped to match house style. European standard governing 1.2379 (X153CrMoV12) and other DIN tool steel grades. Supersedes former DIN 17350 for tool steels. Referenced in European and Middle Eastern engineering procurement. Equivalent German standard: DIN EN ISO 4957.

Available Forms

Round Bar

3–150 mm. Diameter, annealed; drill rod in small sizes; to order. [VERIFY — supply range not confirmed]

Stock & delivery

Stock location
Dubai, UAE (supplied to order)
In stock
Supplied to order — Annealed (+A).
Delivery UAE
Lead time confirmed at quotation
Delivery GCC
Lead time confirmed at quotation — Saudi Arabia, Kuwait, Qatar, Oman, Bahrain
Export
Europe, India, Africa on request
Quotation
Same-day quotation
Minimum order
No minimum order quantity; mill minimums may apply to special sizes

Key standards

EN ISO 4957

Designations & Equivalents

StandardDesignationNotes
AISI / SAEM42ASTM A600 cobalt high speed steel
UNST11342Unified Numbering System
EN / Werkstoff1.3247Material number — primary chemistry on this page
EN NameHS2-9-1-8EN ISO 4957 designation
DINS2-10-1-8Former DIN designation (DIN 17350, withdrawn)
JISSKH59Japanese Industrial Standard
BSBM42British designation
Common NameW2Mo9Cr4VCo8(GB) Chinese designation
Common NameHSS-Co / HSS-E / cobalt high speed steel / 8% cobalt HSS / M42 tool steelBuyer search terms

Compliance & Certification

StandardStatusNotes
EN 10204 3.1SuitableProvided as standard — chemistry (EN ISO 4957 or ASTM A600 as supplied), delivery condition and hardness.

Specifications

Mechanical Properties

Values per EN ISO 4957. Bar length compares conditions within each row.

PropertyAnnealed (+A) | EN ISO 4957
Hardness277 HBmaxSoft annealed (+A)EN ISO 4957 maximum; typically ≤ 269 HB (ASTM A600 practice).
Hardness67–69 HRCHardened 1170–1210°C + tempered 3–4× at about 530–560°CAchievable working hardness — guidance.

Physical Properties

PropertyAnnealed (+A) | EN ISO 4957
Densityat 20°C7.98 g/cm³
Modulus of Elasticityat 20°C217 GPa

Service Conditions

Service Temperature

Notes

Red hardness: cobalt allows M42 tools to keep cutting hardness at higher edge temperatures than M2; hardness falls rapidly above about 600°C (≈64 HRC after tempering at 600°C, ≈44 HRC at 650°C). Not intended for structural service.

Corrosion Performance

General corrosion

Finished tools are commonly steam oxidised, nitrided or PVD coated (TiN, TiAlN) for added wear and corrosion resistance.

Pitting resistance

Not corrosion resistant; store oiled and dry in humid, coastal UAE and GCC conditions.

Additional notes

Not applicable — not a stainless steel.

Heat Treatment

HEAT TREATMENT GUIDE — M42 / 1.3247 / HS2-9-1-8

Forging: preheat slowly to 650–760°C, then 1010–1150°C; cool very slowly. Soft annealing: about 770–880°C, hold 1 h per 25 mm (2 h minimum), slow furnace cooling — 277 HB max (EN ISO 4957), typically ≤ 269 HB. Stress relieving: 600–650°C, about 2 h, slow furnace cooling, after heavy machining. Hardening: harden in vacuum, controlled-atmosphere furnace or rectified salt bath; preheat to 820–870°C, austenitise at 1170–1210°C (about 1160–1180°C in salt, 1180–1190°C in vacuum / atmosphere); quench in oil, salt bath or pressurised gas. Tempering: three to four tempers at about 530–560°C, at least 1 h each, cooling to room temperature between tempers — 67–69 HRC (≈67 HRC at 500°C, ≈69 HRC at 550°C). Surface treatment: PVD coating or nitriding of finished tools.

ENGINEERING NOTES
Weldability
Poor

Not suitable for structural welding. Tool repair welding only with a qualified procedure: high preheat [VERIFY — preheat range per producer], matching high-speed-steel filler, slow cooling and re-tempering. HSS tips and blanks are commonly brazed or friction / butt welded to carbon-steel shanks.

Filler metals
  • Matching cobalt HSS filler rod · Tool-steel repair / TIGCutting-edge repair with high preheat and post-weld temper
  • BAg series · AWS A5.8 / BrazingBrazing HSS tips to carbon-steel shanks
Machinability
Fair

Machinable in the annealed condition with carbide tooling, rigid set-ups and moderate speeds. Rough machine, stress relieve at 600–650°C, finish-machine, then harden. Low vanadium content gives comparatively good grindability for a cobalt HSS after hardening.

Applications

  • Drills and end mills for stainless steel, nickel and titanium alloys
  • Taps and thread-forming tools for tough and work-hardening materials
  • Reamers, counterbores and broaches
  • Gear hobs, gear cutters and form cutters
  • Milling cutters for high-production machining
  • Bimetal bandsaw and hacksaw blade edges
  • Lathe tool bits for hardened and high-strength steels
  • Thread-roll dies, punches and cold header tooling
  • Aerospace machining tools for superalloys
  • Cutting tools for GCC oil and gas component machining in duplex and nickel alloys

Frequently Asked Questions

Quick answers on our grades, certification, supply and lead times.

Still have questions?

Our team responds fast with specifications, certification and stock availability.

Contact our team

M42 / 1.3247 is used for cutting tools that machine difficult materials — stainless steels, nickel and titanium alloys, high-strength and hardened steels — including drills, end mills, taps, reamers, broaches, gear hobs, form cutters and bimetal saw blade edges. Its 8% cobalt keeps the cutting edge hard at high temperatures. In the UAE and GCC it is used by toolmakers and workshops machining oil and gas components in duplex and nickel alloys.

Get in touch

Elevateyourprojectswithoursuperiorsteel