Tool Steel dealers in UAE

M2 / 1.3343 / HS6-5-2C High Speed Steel | Supplier in UAE & GCC

M2 / 1.3343 / HS6-5-2C — W-Mo high speed steel: 269 HB max annealed, 64–66 HRC hardened with red hardness to about 600°C; drills, taps, cutters, punches.

Industries Served

Manufacturing
Mould & Die
Automotive

Overview

M2 (AISI M2 to ASTM A600; 1.3343 / HS6-5-2C to EN ISO 4957; JIS SKH51; BS BM2) is a tungsten-molybdenum high speed tool steel and the most widely used general-purpose HSS. 1.3343 contains 0.86–0.94% carbon, 5.9–6.7% tungsten, 4.7–5.2% molybdenum, 3.8–4.5% chromium and 1.7–2.1% vanadium. Tungsten and molybdenum form hard carbides that retain hardness at red heat, vanadium forms very hard MC carbides for wear resistance and fine grain, and chromium provides deep hardenability. Hardened from 1190–1230°C and triple tempered at about 540–560°C, it reaches 64–66 HRC through secondary hardening and keeps its cutting edge at tool temperatures up to roughly 600°C, with a good balance of toughness, wear resistance and red hardness. AISI M2 is produced in regular-carbon (0.78–0.88% C) and high-carbon (0.95–1.05% C) classes; 1.3343 sits between them, and 1.3339 / HS6-5-2 is the closer European match to regular-carbon M2. It is supplied soft annealed for machining. Typical uses are twist drills, taps, milling cutters, reamers, broaches, saw blades and cold-work punches and dies.

Nifty Alloys supplies M2 / 1.3343 high speed steel to order from Dubai, UAE, in round bar and flat bar, soft annealed. Every supply is dispatched with EN 10204 3.1 Mill Test Certificates as standard, certifying EN ISO 4957 or ASTM A600 chemistry (as supplied), delivery condition and hardness with full traceability to the mill; EN 10204 3.2 third-party inspection is available on request. We deliver across the UAE, to Saudi Arabia, Kuwait, Qatar, Oman and Bahrain, and export to Europe, India and Africa, with lead time confirmed at quotation. Send your size list or drawing to request a quote — quotations are turned around the same day.

Chemical Composition

0.9 %
C

Carbon

0.86 – 0.94 %

0.3 %
Si

Silicon

≤ 0.45 %

0.3 %
Mn

Manganese

≤ 0.4 %

6.2 %
W

Tungsten

5.9 – 6.7 %

5 %
Mo

Molybdenum

4.7 – 5.2 %

4 %
Cr

Chromium

3.8 – 4.5 %

1.9 %
V

Vanadium

1.7 – 2.1 %

P

Phosphorus

≤ 0.03 %

S

Sulfur

≤ 0.03 %

Typical value Range (min–max) Minimum (≥) Maximum (≤) Hover / tap for notes

Standard

EN ISO 4957

EN

Revision: EN ISO 4957 — current edition

Tool steels — specification for chemical composition, heat treatment, and properties of tool steels including cold work, hot work, and high-speed grades.

Published as BS EN ISO 4957; leading BS dropped to match house style. European standard governing 1.2379 (X153CrMoV12) and other DIN tool steel grades. Supersedes former DIN 17350 for tool steels. Referenced in European and Middle Eastern engineering procurement. Equivalent German standard: DIN EN ISO 4957.

Available Forms

Flat Bar

3–100 mm. Thickness; width to order; ground flat stock on request.

Round Bar

3–200 mm. Diameter, annealed; drill rod in small sizes; to order.

Stock & delivery

Stock location
Dubai, UAE (supplied to order)
In stock
Supplied to order — Annealed (+A).
Delivery UAE
Lead time confirmed at quotation
Delivery GCC
Lead time confirmed at quotation — Saudi Arabia, Kuwait, Qatar, Oman, Bahrain
Export
Europe, India, Africa on request
Quotation
Same-day quotation
Minimum order
No minimum order quantity; mill minimums may apply to special sizes

Key standards

EN ISO 4957

Designations & Equivalents

StandardDesignationNotes
AISI / SAEM2ASTM A600 — regular-carbon (0.78–0.88% C) and high-carbon (0.95–1.05% C) classes
UNST11302Unified Numbering System (M2)
EN / Werkstoff1.3343Material number — primary chemistry on this page
EN NameHS6-5-2CEN ISO 4957 designation (0.86–0.94% C)
EN NameHS6-5-2 / 1.3339 — closer to M2 regular CLower-carbon sister grade (about 0.80–0.88% C)
DINS6-5-2Former DIN designation (DIN 17350, withdrawn)
JISSKH51Japanese Industrial Standard
BSBM2British designation
Common NameW6Mo5Cr4V2(GB) Chinese designation
Common NameZ85WDCV06-05-04-02(AFNOR) French designation
Common NameHSS M2 / M2 tool steel / high speed tool steel / HSS drill rodBuyer search terms

Compliance & Certification

StandardStatusNotes
EN 10204 3.1SuitableProvided as standard — chemistry (EN ISO 4957 or ASTM A600 as supplied), delivery condition and hardness.

Specifications

Mechanical Properties

Values per EN ISO 4957. Bar length compares conditions within each row.

PropertyAnnealed (+A) | EN ISO 4957
Hardness269 HBmaxSoft annealed (+A)EN ISO 4957 maximum. ASTM A600 M2 typically 241 HB max [VERIFY].
Hardness64–66 HRCHardened 1190–1230°C + tempered 3× at about 540–560°CAchievable working hardness — guidance.
Tensile Strength (UTS)900 MPatypicalAnnealedTypical — not specified (about 915 MPa equivalent to 269 HB).

Physical Properties

PropertyAnnealed (+A) | EN ISO 4957
Densityat 20°C8.14 g/cm³
Modulus of Elasticityat 20°C217 GPa
Thermal Conductivityat 20°C24 W/m·K
Specific Heat Capacityat 20°C460 J/kg·K
Electrical Resistivityat 20°C0.54 µΩ·m

Service Conditions

Service Temperature

Max 600 °C

Notes

Red hardness: hardened and tempered M2 retains cutting hardness at tool-edge temperatures up to roughly 600°C (above its tempering temperature, hardness falls progressively). Not intended for structural service.

Corrosion Performance

General corrosion

Surface treatments such as nitriding, steam oxide or PVD coatings (TiN, TiAlN) improve wear and corrosion behaviour of finished tools.

Pitting resistance

Not corrosion resistant; store oiled and dry in humid, coastal UAE and GCC conditions.

Additional notes

Not applicable — not a stainless steel.

Heat Treatment

HEAT TREATMENT GUIDE — M2 / 1.3343 / HS6-5-2C

Forging: 1050–1150°C after slow preheating to 850–900°C; do not forge below about 900°C; cool slowly. Soft annealing: about 780–860°C, slow furnace cooling — 269 HB max (EN ISO 4957); A600 M2 typically 241 HB max [VERIFY against ASTM A600]. Stress relieving: 600–650°C, furnace cooling, after rough machining. Hardening: preheat in stages (about 450–500°C, 850–900°C), austenitise at 1190–1230°C (lower end for tougher tools, upper end for maximum red hardness), soak briefly; quench in oil, pressurised gas, air or salt bath at about 500–550°C — about 64–65 HRC as quenched. Tempering: at least two, preferably three tempers at about 540–560°C, 1–2 h each, cooling to room temperature between tempers — secondary hardening to 64–66 HRC (about 64 HRC after 560°C). Surface treatment: nitriding or PVD coating of finished tools for added wear resistance.

ENGINEERING NOTES
Weldability
Poor

Not suitable for structural welding. Tool repair welding is possible only with a qualified procedure: preheat to about 500–600°C [VERIFY — preheat range per producer], use a matching high-speed-steel filler, cool slowly and re-temper. Brazing and friction / butt welding to carbon-steel shanks is common for drills and cutters.

Filler metals
  • Matching M2 / HSS filler rod · Tool-steel repair / TIGCutting-edge repair with high preheat and post-weld temper
  • BAg series · AWS A5.8 / BrazingBrazing HSS tips to carbon-steel shanks
Machinability
Fair

Machinability in the annealed condition is about 50–65% of a 1% carbon tool steel. Use rigid set-ups, carbide tooling and moderate speeds. Rough machine, stress relieve at 600–650°C, finish-machine, then harden. After hardening (64–66 HRC) shaping is by grinding; EDM is possible with care.

Frequently Asked Questions

Quick answers on our grades, certification, supply and lead times.

Still have questions?

Our team responds fast with specifications, certification and stock availability.

Contact our team

M2 / 1.3343 is used for cutting tools that must keep a hard edge at high cutting speeds: twist drills, taps, milling cutters, reamers, broaches, saw blades and lathe tool bits. It is also used for long-run cold-work punches, dies and cold heading tools. Hardened and tempered it reaches 64–66 HRC and keeps its edge at red heat. In the UAE and GCC it is used by toolrooms, tool makers and maintenance workshops.

Get in touch

Elevateyourprojectswithoursuperiorsteel