Carbon Steel dealers in UAE

BS 1407 / 115CrV3 / 1.2210 Silver Steel | Supplier in UAE & GCC

BS 1407 / 115CrV3 silver steel — precision-ground high-carbon bright steel: hardens to about 64 HRC; punches, dowels, pins, spindles, small tools.

Industries Served

Manufacturing
Automotive
Aerospace & Defence

Overview

BS 1407 silver steel (high-carbon bright steel; nearest EN grade 115CrV3 / 1.2210; nearest AISI W2 / L2; JIS SKS43) is a high-carbon tool steel containing 0.95–1.25% carbon, 0.35–0.45% chromium and 0.25–0.45% manganese, with silicon up to 0.40% and phosphorus and sulphur limited to 0.045% maximum. Despite the name it contains no silver — the term refers to its bright, polished appearance after centreless grinding. Its high carbon content allows it to be hardened to give considerable wear resistance, while the chromium addition improves hardenability and strength. It is supplied spheroidise annealed (BS 1407 maximum 285 HB) and precision ground to close tolerance (about h9), so it can be machined and used directly as accurate ground stock. Hardening from about 760–810°C into water, or 810–840°C into oil for small sections, gives about 64 HRC as quenched; tempering at 150–300°C trades hardness for toughness (for example about 62 HRC at 200°C and 57 HRC at 300°C). The nearest EN grade, 115CrV3, adds 0.07–0.12% vanadium and slightly more chromium for finer grain. It is not weldable — it becomes brittle — but can be brazed with silver solder. Typical uses are punches, dowels and pins, mandrels, spindles and shafts, drill bushes, collets, knurls, lathe centres, engraving tools, small cutters, taps and model-engineering parts.

Nifty Alloys supplies BS 1407 / 115CrV3 silver steel from Dubai, UAE, as precision-ground round bar in metric and imperial sizes, annealed and ready to machine. Every supply carries an EN 10204 3.1 Mill Test Certificate as standard; EN 10204 3.2 third-party inspection is available on request. We deliver across the UAE within 24–48 hours, to Saudi Arabia, Kuwait, Qatar, Oman and Bahrain within 3–5 working days, and export to Europe, India and Africa. Send your size list to request a quote — quotations are turned around the same day.

Chemical Composition

1.13 %
C

Carbon

0.95 – 1.25 %

0.22 %
Si

Silicon

≤ 0.4 %

0.37 %
Mn

Manganese

0.25 – 0.45 %

0.43 %
Cr

Chromium

0.35 – 0.45 %

V

Vanadium

P

Phosphorus

≤ 0.045 %

S

Sulfur

≤ 0.045 %

Typical value Range (min–max) Minimum (≥) Maximum (≤) Hover / tap for notes

Standard

BS 1407

Other

Revision: BS 1407:1970

Available Forms

Precision Ground Round Bar

1–50 mm. Diameter; 333 mm and 1 m lengths; imperial sizes 1/16"–2" on request. [VERIFY — stock range not confirmed]

Stock & delivery

Stock location
Dubai, UAE
In stock
Annealed, precision ground [VERIFY — stocked sizes].
Delivery UAE
24–48 hours
Delivery GCC
3–5 working days — Saudi Arabia, Kuwait, Qatar, Oman, Bahrain
Export
Europe, India, Africa on request
Quotation
Same-day quotation
Minimum order
No minimum order quantity for standard sizes; single bars available

Key standards

BS 1407

Designations & Equivalents

StandardDesignationNotes
BSBS 1407High-carbon bright steel (silver steel) — primary
EN Name115CrV3EN ISO 4957 cold-work tool steel — adds 0.07–0.12% V, Cr 0.50–0.80%
EN / Werkstoff1.2210(EN Number (nearest)) DIN / EN material number — nearest
AISI / SAEW2 / L2(AISI (nearest)) Nearest US tool steels — not identical
JISSKS43Nearest Japanese grade
Common NameDIN 670 h8 (1.2210) / ISO h9(Tolerance standard) Ground-bar tolerance references — aliases only
Common NameNone(AMS / MIL) No AMS or MIL specification applies
Common NameSilver steel / silver steel bar / precision ground silver steel / high carbon bright steel / Stubs-type ground stockBuyer search terms

Compliance & Certification

StandardStatusNotes
EN 10204 3.1SuitableProvided as standard — chemistry, condition and hardness.

Specifications

Mechanical Properties

Values per BS 1407. Bar length compares conditions within each row.

PropertyAnnealed, Precision Ground | BS 1407
Hardness285 HBmaxAs supplied (annealed)BS 1407 maximum.
Hardness64–66 HRCAs quenchedTypical (1.2210 data).
Hardness62 HRCtypicalTempered 200°CTypical.
Hardness57 HRCtypicalTempered 300°CTypical.

Physical Properties

PropertyAnnealed, Precision Ground | BS 1407
Densityat 20°C7.8 g/cm³
Modulus of Elasticityat 20°C210 GPa
Thermal Conductivityat 20°C32 W/m·K
Coefficient of Thermal Expansionat 20–100°C11.5 µm/m·°C
Specific Heat Capacityat 20°C460 J/kg·K

Service Conditions

Service Temperature

Max 150 °C

Notes

Hardened parts must not be used above their tempering temperature (typically 150–300°C), or hardness will be lost. Ambient-temperature tooling service.

Corrosion Performance

General corrosion

Rusts readily if exposed to moisture — supplied with a protective coating; keep oiled and store dry, especially in humid GCC conditions.

Pitting resistance

Not applicable — carbon tool steel.

Additional notes

No corrosion resistance. Surface protection required.

Heat Treatment

HEAT TREATMENT GUIDE — BS 1407 / 115CrV3 / 1.2210

Supply: spheroidise annealed, ≤ 285 HB (BS 1407); 1.2210 ≤ 220 HB. Annealing: 710–750°C, slow furnace cool. Stress relieving: about 650°C (before final machining). Hardening: heat slowly; 760–810°C, quench in water (larger sections), or 810–840°C, quench in oil (up to about 15 mm). As-quenched hardness about 64–66 HRC. Tempering: immediately after hardening, 150–300°C — typical hardness 64 HRC (100°C), 62 HRC (200°C), 57 HRC (300°C), 51 HRC (400°C). Hot forming: 1050–850°C.

ENGINEERING NOTES
Weldability
Poor

Not weldable — the high carbon content makes welds and heat-affected zones brittle and prone to cracking. Join by brazing with silver solder or by mechanical fixing.

Filler metals
  • BAg series · AWS A5.8 / BrazingSilver brazing alloys (silver solder) — recommended joining method
Machinability
Good

Readily machinable in the supplied spheroidise-annealed condition. Machine before hardening; finish-grind after heat treatment for best accuracy.

Applications

  • Punches and piercing tools
  • Dowels, pins and ejector pins
  • Mandrels, spindles and small shafts
  • Drill bushes and guide bushes
  • Collets, knurls and lathe centres
  • Engraving tools, small cutters and scrapers
  • Taps and drills for mild steel
  • Die posts and instrument parts
  • Model-engineering and precision-mechanism parts
  • Toolroom stock for GCC maintenance workshops

Frequently Asked Questions

Quick answers on our grades, certification, supply and lead times.

Still have questions?

Our team responds fast with specifications, certification and stock availability.

Contact our team

BS 1407 silver steel is used for punches, dowels and pins, mandrels, spindles and small shafts, drill bushes, collets, knurls, lathe centres, engraving tools, small cutters, taps and model-engineering parts. In the UAE and GCC it is standard toolroom stock for maintenance and precision workshops.

Get in touch

Elevateyourprojectswithoursuperiorsteel