Carbon Steel
Carbon steels are iron-carbon alloys where carbon is the primary alloying element (typically 0.05-1.00% C). Nifty Alloys stocks mild steel, medium carbon steel (EN8/C45), high carbon steel (EN9), and structural steel grades (S275, S355) for general engineering, construction, automotive, and fabrication applications across the UAE, GCC, and export markets.
080M50 / EN43A / C50 — 0.50% carbon steel between EN8 and EN9: good strength and wear resistance, flame or induction hardenable; shafts, gears, piston rods.
BS 1407 / 115CrV3 silver steel — precision-ground high-carbon bright steel: hardens to about 64 HRC; punches, dowels, pins, spindles, small tools.
EN32 / 080A15 / C15E — plain carbon case hardening steel: carburise for a hard wear-resistant case over a tough core; gears, cams, spindles, rollers.
EN8 (080M40 / C45) — medium-carbon engineering steel: 550–620 MPa min normalised, up to 850 MPa Q&T, 50–55 HRC induction hardened surface; shafts and axles.
EN9 / 070M55 / C55 — 0.55% carbon steel: higher strength and wear resistance than EN8, flame or induction hardenable; gears, sprockets, shafts, cams.
S275JR / 1.0044 — EN 10025-2 general structural steel: 275 MPa yield, excellent weldability and formability, 27 J at +20°C; plate and flat bar.
S355 / S355JR / S355J2 — EN 10025-2 high-yield structural steel: 355 MPa yield, excellent weldability, J2 impact at −20°C; plate, flat and round bar.
Ras Al Khor Ind. Area-2, Dubai United Arab Emirtates
+971 565450916