Tool Steel dealers in UAE

P20 / 1.2311 / 1.2312 / 1.2738 Plastic Mould Steel | Supplier in UAE & GCC

P20 mould steel family — 1.2311, free-cutting 1.2312 and nickel 1.2738 — pre-hardened 280–325 HB for injection moulds, mould bases and large blocks.

Industries Served

Mould & Die
Automotive
Manufacturing
Heavy Engineering

Overview

P20 plastic mould steel is a family of chromium-manganese-molybdenum steels to EN ISO 4957, supplied quenched and tempered by the mill to 280–325 HB (about 29–34 HRC) so moulds can be machined straight from stock with no heat treatment or distortion. The standard grade, 1.2311 (40CrMnMo7; near-equivalent AISI P20 to ASTM A681), contains 0.35–0.45% carbon, 1.30–1.60% manganese, 1.80–2.10% chromium and 0.15–0.25% molybdenum, and offers a good balance of machinability, toughness, polishability and texturing for mould cavities and cores. 1.2312 (40CrMnMoS8-6, P20+S) adds 0.050–0.100% sulphur for free machining — faster cutting and longer tool life for mould bases, bolsters and holders, at the cost of limited polishability. 1.2738 (40CrMnNiMo8-6-4, P20+Ni) adds 0.90–1.20% nickel for more uniform hardness through very large blocks, with good polishability and toughness for big automotive and appliance moulds. All three nitride well and accept chrome or nickel plating; AISI P20 itself is leaner in manganese and richer in molybdenum than 1.2311, and is supplied on request.

Nifty Alloys supplies the P20 family — 1.2311, 1.2312 and 1.2738 — from Dubai, UAE, in plate / block, flat bar and round bar, pre-hardened to 280–325 HB and saw cut or milled to mould size. Our team can help you choose between 1.2311 for polished cavities, 1.2312 for fast-machined mould bases and 1.2738 for large blocks, or stainless 1.2083 for corrosive polymers. Every supply carries an EN 10204 3.1 Mill Test Certificate stating the grade supplied, its chemistry and delivered hardness; EN 10204 3.2 third-party inspection is available on request. We deliver across the UAE within 24–48 hours, to Saudi Arabia, Kuwait, Qatar, Oman and Bahrain within 3–5 working days, and export to Europe, India and Africa. Send your block sizes and grade to request a quote — quotations are turned around the same day.

Chemical Composition

0.4 %
C

Carbon

0.35 – 0.45 %

0.3 %
Si

Silicon

0.2 – 0.4 %

1.5 %
Mn

Manganese

1.3 – 1.6 %

1.9 %
Cr

Chromium

1.8 – 2.1 %

0.2 %
Mo

Molybdenum

0.15 – 0.25 %

Ni

Nickel

S

Sulfur

≤ 0.035 %

P

Phosphorus

≤ 0.035 %

Typical value Range (min–max) Minimum (≥) Maximum (≤) Hover / tap for notes

Standard

EN ISO 4957

EN

Revision: EN ISO 4957:2018

Tool steels — specification for chemical composition, heat treatment, and properties of tool steels including cold work, hot work, and high-speed grades.

Published as BS EN ISO 4957; leading BS dropped to match house style. European standard governing 1.2379 (X153CrMoV12) and other DIN tool steel grades. Supersedes former DIN 17350 for tool steels. Referenced in European and Middle Eastern engineering procurement. Equivalent German standard: DIN EN ISO 4957.

Available Forms

Flat Bar

10–50 mm. Thickness; width to order.

Plate / Block

20–100 mm. Thickness. 1.2311 / 1.2312 typically to about 500 mm; 1.2738 for blocks above about 400 mm. Saw cut / milled to size.

Round Bar

20–250 mm. Diameter, pre-hardened.

Stock & delivery

Stock location
Dubai, UAE
In stock
Pre-Hardened 280–325 HB — 1.2311 and 1.2312 held in Dubai stock (per register); 1.2738 stock to be confirmed [VERIFY]. Saw cutting and milling to size on request; ASTM A681 P20 chemistry on request.
Delivery UAE
24–48 hours
Delivery GCC
3–5 working days — Saudi Arabia, Kuwait, Qatar, Oman, Bahrain
Export
Europe, India, Africa on request
Quotation
Same-day quotation
Minimum order
No minimum order quantity for standard sizes; cut pieces available

Key standards

EN ISO 4957

Designations & Equivalents

StandardDesignationNotes
EN / Werkstoff1.231140CrMnMo7 — standard P20 (SpecSheet 1, primary chemistry)
EN Name40CrMnMo7EN ISO 4957 name for 1.2311
EN / Werkstoff1.231240CrMnMoS8-6 — free-cutting P20+S (SpecSheet 2)
EN Name40CrMnMoS8-6EN ISO 4957 name for 1.2312
EN / Werkstoff1.273840CrMnNiMo8-6-4 — nickel-bearing P20+Ni for large moulds (SpecSheet 3)
EN Name40CrMnNiMo8-6-4EN ISO 4957 name for 1.2738
AISI / SAEP20 — near equivalentASTM A681 (UNS T51620) — differs from 1.2311 in Mn and Mo
UNST51620AISI P20
Common NameP20+S / P20+NiIndustry shorthands for 1.2312 and 1.2738 — not AISI designations
Common Name40CMD8 / 40CMD8.S(AFNOR) French designations (1.2311 / 1.2312)
Common Name3Cr2Mo / 3Cr2NiMo — nearest(GB) Chinese designations (P20 / P20+Ni)
AMSNoneNo AMS / MIL specification applies to this family
Common NameP20 mould steel / plastic mold steel / pre-hardened mould steel / mould base steelBuyer search terms (UK and US spellings)

Compliance & Certification

StandardStatusNotes
EN 10204 3.1SuitableProvided as standard — states grade supplied (1.2311, 1.2312 or 1.2738), EN ISO 4957 chemistry and delivered hardness.

Specifications

Mechanical Properties

Values per EN ISO 4957. Bar length compares conditions within each row.

Property1.2311 Pre-Hardened 280–325 HB | EN ISO 49571.2312 Free-Cutting Pre-Hardened 280–325 HB | EN ISO 49571.2738 Pre-Hardened 280–325 HB | EN ISO 4957
Hardness280–325 HBTypical 300 HBAs delivered (+QT)Mill delivery range (about 29–34 HRC).280–325 HBTypical 300 HBAs delivered (+QT)Mill delivery range (about 29–34 HRC).280–325 HBTypical 300 HBAs delivered (+QT)Mill delivery range (about 29–34 HRC), uniform through large sections.
Tensile Strength (UTS)950–1100 MPaAs deliveredCorresponding range — for information.950–1100 MPaAs deliveredCorresponding range — for information.950–1100 MPaAs deliveredCorresponding range — for information.

Physical Properties

Property1.2311 Pre-Hardened 280–325 HB | EN ISO 49571.2312 Free-Cutting Pre-Hardened 280–325 HB | EN ISO 49571.2738 Pre-Hardened 280–325 HB | EN ISO 4957
Densityat 20°C7.85 g/cm³7.85 g/cm³7.85 g/cm³
Thermal Conductivityat 20°C33 W/m·K33 W/m·K33 W/m·K
Coefficient of Thermal Expansionat 20–100°C12.1 µm/m·°C12.1 µm/m·°C12.1 µm/m·°C

Service Conditions

Service Temperature

Max 200 °C

Notes

Practical continuous limit for plastic mould duty, well below the mill tempering temperature. Suitable for zinc die casting, but not for aluminium or magnesium die casting — use H13 / 1.2344 there.

Corrosion Performance

General corrosion

No corrosion resistance. Cavities and cooling channels rust in humid UAE and GCC conditions and are attacked by PVC and other corrosive polymers — keep moulds dry, treat cooling water, or specify stainless 1.2083 / chrome-plate the cavity.

Pitting resistance

No pitting resistance; sulphide inclusions in 1.2312 can act as initiation sites.

Additional notes

Not applicable — low-alloy mould steels (about 2% Cr).

Heat Treatment

HEAT TREATMENT GUIDE — P20 / 1.2311 / 1.2312 / 1.2738

Supply condition (all three): quenched and tempered by the mill to 280–325 HB (29–34 HRC) — machine directly to size. Stress relieving: 500–550°C, about 2 h, slow cooling — below the mill tempering temperature, after heavy roughing or welding. Re-hardening (only if needed): soft anneal at about 710–740°C (about 230–235 HB max), austenitise at 830–870°C, quench in oil, polymer or hot bath — about 51 HRC; temper to suit (≈50 HRC at 200°C, ≈46 HRC at 400°C, ≈42 HRC at 500°C, ≈36 HRC at 600°C). 1.2738 holds uniform hardness through thicker sections. Nitriding: gas nitriding at 525°C — about 0.30 mm case after 20 h, 0.35 mm after 40 h, 0.50 mm after 60 h; surface about 60 HRC (about 650 HV; plasma processes up to about 800 HV) — common on moulds for glass-filled polymers. Flame / induction hardening: local surface hardness about 50–55 HRC (laser up to about 58 HRC); temper afterwards. Forging: heat to about 1050°C; do not forge below about 930°C. Plating: chrome or nickel plating possible; bake at about 180°C after hard chrome to avoid hydrogen embrittlement.

ENGINEERING NOTES
Weldability
Fair

Mould repair welding is routine for 1.2311 and 1.2738 with a qualified procedure: preheat to about 250–300°C [VERIFY — preheat range per producer], matching P20-type filler so the repair polishes and textures like the parent, interpass at preheat, slow cooling, and stress relief below the mill tempering temperature (about 500–550°C). 1.2312 is more prone to hot cracking and porosity because of its sulphur — avoid significant weld repair on it.

Filler metals
  • P20-type matching rod · Mould repair rod / TIG (GTAW)Cavity repair with matching polish response [VERIFY — consumable code]
  • P20-type matching wire · Mould repair wire / LaserFine edge and parting-line repair with low heat input [VERIFY — consumable code]
  • ER80S-B2 · AWS A5.28 / TIGCr-Mo wire for build-up in non-cavity areas
Machinability
Good

All three are designed to be machined at 280–325 HB with carbide tooling. 1.2312 machines fastest (sulphur free-cutting) but polishes least; 1.2311 and 1.2738 give good polish, EDM and photo-etching / texturing response. Stress relieve at 500–550°C after heavy roughing of large blocks, before finish machining.

Applications

  • Plastic injection mould cavities, cores and inserts for PP, PE, ABS and PS (1.2311)
  • Large automotive bumper, dashboard and appliance moulds in thick blocks (1.2738)
  • Mould bases, frames, bolsters and backing plates machined at high speed (1.2312)
  • Blow moulds for bottles and containers in GCC water and beverage packaging
  • Moulds for crates, buckets, furniture and household goods
  • Zinc and low-melting-alloy die-casting dies
  • Hydroforming tools and die holders
  • Prototype and short-run moulds machined straight from stock
  • Nitrided or chrome-plated mould components for glass-filled polymers
  • Electronic and appliance housing moulds

Frequently Asked Questions

Quick answers on our grades, certification, supply and lead times.

Still have questions?

Our team responds fast with specifications, certification and stock availability.

Contact our team

P20 mould steel is used for plastic injection and blow moulds, mould bases and bolsters, cavity and core plates, zinc die-casting dies and hydroforming tools. Because 1.2311, 1.2312 and 1.2738 are supplied pre-hardened to 280–325 HB, moulds are machined straight from stock with no heat treatment. In the UAE and GCC it is the standard mould steel for packaging, water-bottling, automotive and consumer-goods moulders.

Get in touch

Elevateyourprojectswithoursuperiorsteel