Alloy Steel

Alloy Steel

Low-alloy and high-alloy engineering steels containing chromium, molybdenum, nickel, vanadium, or combinations. Used where higher strength or hardenability than plain carbon steel is required.

Grades

16MnCr5 / 1.7131 / 527M17 — Mn-Cr case hardening steel: 207 HB max annealed, about 58–62 HRC carburised case over an 800–1100 MPa core; gears, shafts.

View details

31CrMoV9 / 1.8519 — Cr-Mo-V nitriding steel to EN 10085: 1100–1300 MPa Q&T core, about 800 HV nitrided case, stable to about 500°C; gears and shafts.

View details

708M40 / EN19A / 708M40T — 1% Cr-Mo high-tensile steel (0.15–0.25% Mo): Condition T 850–1000 MPa, 248–302 HB; shafts, gears, studs and axles.

View details

AISI 4130 (25CrMo4 / 1.7218) — weldable Cr-Mo alloy steel supplied Q&T to 80K NACE MR0175 (≤22 HRC) or 110K yield for oil & gas wellhead and downhole tools.

View details

AISI 4140 (42CrMo4 / EN19) — Cr-Mo through-hardening alloy steel supplied Q&T to 850–1100 MPa, plus 80K NACE and 110K oilfield grades.

View details

AISI 4145 / 4145H Mod — Cr-Mo drill collar steel, Q&T to 285–341 HB and 758 MPa min yield per API Spec 7-1; collars, subs, kellys and stabilisers.

View details

AISI 4330V / 4330 Mod — vanadium-modified Ni-Cr-Mo steel with deep hardenability and low-temperature toughness; API 6A 75K bodies, AMS 6427 aerospace parts.

View details

AISI 4340 / EN24 (817M40, 34CrNiMo6) — 1.5% Ni-Cr-Mo through-hardening steel: EN24T 850–1000 MPa in sections to 250 mm; shafts, gears and oilfield tools.

View details

AISI 6150 / 51CrV4 (1.8159) — Cr-V spring and engineering steel: 248 HB max annealed, 800–1300 MPa Q&T; springs, torsion bars, shafts and gears.

View details

AISI 8620 / 20NiCrMo2-2 (1.6523) — Ni-Cr-Mo case hardening steel: about 61 HRC carburised case over a tough core; gears, pinions, shafts, cams.

View details

EN16 / 605M36 / EN16T — Mn-Mo through-hardening steel, EN16T 850–1000 MPa with excellent ductility and freedom from temper brittleness; shafts, bolts, gears.

View details

EN26 / 826M40 (40NiMoCr10-5) — 2.5% Ni-Cr-Mo high-tensile steel: Condition V 1000–1150 MPa to 250 mm ruling section; heavy shafts, gears and studs.

View details

Get in touch

Elevateyourprojectswithoursuperiorsteel